BibTex Citation Data :
@article{JAFT31958, author = {Amalia Wahyuningtyas and Zada Talitha and Lasuardi Permana and Ajeng Ayuningtias and Isnaini Adyani and Nayla Barryawan and Ranita Br Ginting}, title = {Optimization and Characterization of Sea Grape Carrageenan (Caulerpa sp.) Using Ultrasonic-Assisted Extraction and Microwave-Assisted Extraction Methods}, journal = {Journal of Applied Food Technology}, volume = {13}, number = {2}, year = {2026}, keywords = {carrageenan extraction; sea grape (Caulerpa sp.); ultrasonic-assisted extraction; microwave-assisted extraction; response surface methodology}, abstract = { This study aimed to optimize carrageenan extraction from sea grape ( Caulerpa sp. ) and to characterize physicochemical properties in comparison with commercial carrageenan using Ultrasonic-Assisted Extraction (UAE) and Microwave-Assisted Extraction (MAE) methods. Extraction optimization was conducted using Response Surface Methodology (RSM), a Box-Benhken Design was employed to evaluate the effects of sample amount, solvent concentration, and time on yield, viscosity, and sulfate content. The extracted carrageenan was then analyzed for yield, moisture content, ash content, sulfate content, viscosity, water holding capacity (WHC), and solubility. The results showed that the optimum extraction conditions for the MAE method were obtained at a sample size of 40 g, a solvent concentration of 10%, and an extraction time of 40 minutes, resulting in a predicted carrageenan yield of 15.23%, 3.66 cP viscosity, and 27.61% sulfate content. Experimental validation under the predicted optimum conditions yielded an extraction yield of 14.53%, viscosity of 3.68 cP, and sulfate content of 24.71%. Meanwhile, the UAE method achieved optimum conditions at a sample size of 20 g, a solvent concentration of 9.11%, and an extraction time of 40 minutes, with a predicted yield of 11.01%, 3.54 cP viscosity, and 18.55% sulfate content. Experimental validation under the predicted optimum conditions yielded an extraction yield of 13.12%, viscosity of 3.60 cP, and sulfate content of 17.30 %. Under these conditions, the extracted carrageenan showed a water content of 9.34–9.94%, ash content of 53.01–54.72%, sulfate content of 17.30–24.21%, viscosity of 3.60–3.68 cP, water holding capacity (WHC) of 102.93–110.61 g/g, and solubility ranging from 71.80% to 95.23% depending on temperature. Compared to commercial carrageenan, the extracted product exhibits a much lower viscosity but a comparable sulfate content that is still within the standard range. }, issn = {2614-7076}, pages = {106--117} doi = {10.17728/jaft.31958}, url = {https://ejournal2.undip.ac.id/index.php/jaft/article/view/31958} }
Refworks Citation Data :
This study aimed to optimize carrageenan extraction from sea grape (Caulerpa sp.) and to characterize physicochemical properties in comparison with commercial carrageenan using Ultrasonic-Assisted Extraction (UAE) and Microwave-Assisted Extraction (MAE) methods. Extraction optimization was conducted using Response Surface Methodology (RSM), a Box-Benhken Design was employed to evaluate the effects of sample amount, solvent concentration, and time on yield, viscosity, and sulfate content. The extracted carrageenan was then analyzed for yield, moisture content, ash content, sulfate content, viscosity, water holding capacity (WHC), and solubility. The results showed that the optimum extraction conditions for the MAE method were obtained at a sample size of 40 g, a solvent concentration of 10%, and an extraction time of 40 minutes, resulting in a predicted carrageenan yield of 15.23%, 3.66 cP viscosity, and 27.61% sulfate content. Experimental validation under the predicted optimum conditions yielded an extraction yield of 14.53%, viscosity of 3.68 cP, and sulfate content of 24.71%. Meanwhile, the UAE method achieved optimum conditions at a sample size of 20 g, a solvent concentration of 9.11%, and an extraction time of 40 minutes, with a predicted yield of 11.01%, 3.54 cP viscosity, and 18.55% sulfate content. Experimental validation under the predicted optimum conditions yielded an extraction yield of 13.12%, viscosity of 3.60 cP, and sulfate content of 17.30 %. Under these conditions, the extracted carrageenan showed a water content of 9.34–9.94%, ash content of 53.01–54.72%, sulfate content of 17.30–24.21%, viscosity of 3.60–3.68 cP, water holding capacity (WHC) of 102.93–110.61 g/g, and solubility ranging from 71.80% to 95.23% depending on temperature. Compared to commercial carrageenan, the extracted product exhibits a much lower viscosity but a comparable sulfate content that is still within the standard range.
Article Metrics:
Last update:
The authors submitting a manuscript do so on the understanding that if accepted for publication, copyright of the article shall be assigned to Journal of Applied Food Technology and Department of Food Technology, Universitas Diponegoro.
Copyright encompasses rights to reproduce and deliver the article in all form and media, including reprints, photographs, microfilms and any other similar reproductions, as well as translations. The reproduction of any part of this journal, its storage in databases and its transmission by any form or media, such as electronic, electrostatic and mechanical copies, photocopies, recordings, magnetic media, etc., will be allowed.
Journal of Applied Food Technology and Department of Food Technology, Universitas Diponegoro make every effort to ensure that no wrong or misleading data, opinions or statements be published in the journal. In any way, the contents of the articles and advertisements published in Journal of Applied Food Technology are sole and responsibility of their respective authors and advertisers.
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
AddressDepartment of Food Technology, Faculty of Animal and Agricultural Sciences, Diponegoro University, Indonesia Jl. Prof. Soedarto SH Tembalang-Semarang, Building B 3rd Floor 50275
Email: jaft@live.undip.ac.id
View My Stats