skip to main content

PEMASANGAN PIPA HDPE PADA PENYAMBUNGAN PIPA IRIGASI DENGAN METODE BUTT FUSION

Dery Syafrizal  -  Program Studi Pendidikan Profesi Insinyur Fakultas Teknik, Universitas Diponegoro, Indonesia
*W Widayat  -  Program Studi Pendidikan Profesi Insinyur Fakultas Teknik, Universitas Diponegoro, Indonesia
Suseno Darsono  -  Program Studi Pendidikan Profesi Insinyur Fakultas Teknik, Universitas Diponegoro, Indonesia
Received: 4 Jun 2022; Revised: 18 Jul 2022; Accepted: 1 Aug 2022; Available online: 18 Aug 2019; Published: 19 Aug 2022.

Citation Format:
Abstract

This paper  was made based on the experience of implementing a network development project of the raw Spam

Regional transmission pipeline BANJARBAKULA from IPA II Pinus (Kab. Banjar) to IPA Pramuka (Banjarmasin city). The path to be traversed installation of pipes not all can be accessed properly to mobilize pipes to  the location, until another alternative is found SO that HDPE pipe OD 710 mm to the location of the Pipeline installation plan, by the WAY of unwrapped HDPE pipe OD 710 mm in the irrigation channel primary Riam Kanan. Connection of HDPE pipe divided by two namely short circuit and long circuit with connection method using butt Fusion tool, until the pipe is connected to a single unit and hydrotest test results meet   the required specifications.

 

Keywords : HDPE pipe OD 710 mm,  butt fusion,  curtain pipe, hydrotest

Fulltext View|Download

Article Metrics:

  1. SNI 4829.1-2015,”Sistem perpipaan plastik – Pipa polietilena (PE) dan fitting untuk system penyediaan air minum bagian 1 Umum”. Badan Standardisasi Indonesia
  2. SNI 4829.1-2015,”Sistem perpipaan plastik – Pipa polietilena (PE) dan fitting untuk system penyediaan air minum bagian 2 Pipa”. Badan Standardisasi Indonesia
  3. SNI 4829.1-2015,”Sistem perpipaan plastik – Pipa polietilena (PE) dan fitting untuk system penyediaan air minum bagian 3 Fitting”. Badan Standardisasi Indonesia
  4. SNI 7509-2011,”Tata cara perencanaan Teknik jaringan distribusi dan unit pelayanan system penyediaan air minum”. Badan Standardisasi Indonesia
  5. SNI 7511-2011,”Tata cara pemasangan pipa transmisi dan pipa distribusi serta bangunan pelintas pipa”. Badan Standardisasi Indonesia
  6. ISO 21307-2017,”Plastic pipe and fittings – Butt fusion jointing procedures for polyethylene (PE) piping systems”
  7. Brian Boman and Sanjay Shukla,”Materials and Installation of Delivery Pipes For Irrigation System”. IFAS Extension, University of Florida, CIR 1424, February 2001
  8. Zamzami, Azmeri & Syamsidik, 2,”Sistem Jaringan Distribusi Air Bersih PDAM Tirta Tawar Kabupaten Aceh Tengah”. Jurnal Arsip Rakayasa Sipil dan Perencanaan E-ISSN : 2615-1340, 2018
  9. Oneway Success, 2017,” 3 Metode Penyambungan Pipa HDPE”
  10. Libratam Group, 2012,” Apa itu pipa HDPE ?”
  11. Palapanews, 2018,”Ini-keunggulan-bila-menggunakan-pipa-hdpe”

Last update:

No citation recorded.

Last update:

No citation recorded.