skip to main content

POTENSI PASIR KUARSA SEBAGAI BAHAN BAKU SEMIKONDUKTOR DAERAH KECAMATAN DUSUN SELATAN DAN DUSUN UTARA, KAB. BARITO SELATAN, PROVINSI KALIMANTAN TENGAH

Department of Geological Engineering, Universitas AKPRIND Indonesia, Jl. Kalisahak No.28 Kompleks Balapan, Yogyakarta, 55222, Indonesia

Received: 14 Apr 2025; Published: 13 Jun 2025.
Open Access Copyright (c) 2025 Jurnal Geosains dan Teknologi under http://creativecommons.org/licenses/by-sa/4.0.

Citation Format:
Abstract
More research into this commodity is necessary due to the demand for premium silica sand for a variety of industrial uses, particularly as a raw material for semiconductors. The purpose of this study is to evaluate the quality of quartz sand as a raw material for semiconductors at the research site. Geochemical analysis is the technique used to determine each sample's composition. According to the examination results, Samples 1 and 3 have impurities over the limit specified for semiconductor materials, although having a high SiO₂ content (above 99%). Sample 2 had the most contaminants and the lowest SiO₂ content (92.17%). SiO₂ and impurities, particularly AlO₃ and TiO₂, had a substantial negative association, according to Pearson correlation analysis. The three silica sand samples are determined to be unsatisfactory in terms of purity.
Fulltext

Article Metrics:

  1. Arif, S. et al. (2023) “Identification of the Potential Quartz Sandstone in the Sambong Area By the Dipole-Dipole Configuration of Resistivity Method,” GEOSPATIAL INFORMATION, 7(1)
  2. Darwis, D. et al. (2017) “Purification and Characterization of SiO2 Based Quartz Sand from" Pasir Putih" Village, South Pamona District,” in 2nd International Conference on Education, Science, and Technology (ICEST 2017). Atlantis Press, hal. 214–216
  3. Handayani, S. et al. (2023) “Biobeneficiation of Langkat quartz sand by using indigenous Aspergillus niger fungus.,” Mining of Mineral Deposits, 17(3)
  4. Li, F. et al. (2021) “Purification mechanism of quartz sand by combination of microwave heating and ultrasound assisted acid leaching treatment,” Silicon, 13, hal. 531–541
  5. Li, S. et al. (2024) “Review of upscale quartz sand purification process: From raw material properties to efficient technologies,” Mineral Processing and Extractive Metallurgy, 133(4), hal. 171–190
  6. Manyara, S.G. (2014) “QUANTITATIVE MINERALOGY OF HIGH PURITY QUARTZ, CASE OF SPRUCE PINE, NORTH CAROLINA.” Institutt for geologi og bergteknikk
  7. Xia, M., Yang, X. dan Hou, Z. (2024) “Preparation of High-Purity Quartz Sand by Vein Quartz Purification and Characteristics: A Case Study of Pakistan Vein Quartz,” Minerals, 14(7), hal. 727
  8. Xie, Y. et al. (2024) “Research on 4N8 High-Purity Quartz Purification Technology Prepared Using Vein Quartz from Pakistan,” Minerals, 14(10), hal. 1049
  9. Zeng, H. et al. (2012) “Effect and complexation mechanism of complex ion in quartz purification by oxidation leaching,” Mining Research and Development, 6, hal. 67–70
  10. Zhang, Q.D. et al. (2017) “Experimental Research on preparation technics of high-purity quartz material,” Key Engineering Materials, 748, hal. 17–21

Last update:

No citation recorded.

Last update:

No citation recorded.