skip to main content

Reliability Analysis of Fire Water Line

Sutrisno Sutrisno scopus  -  Universitas Diponegoro, Indonesia
*Didik Ariwibowo scopus  -  Universitas Diponegoro
Seno Darmanto scopus  -  Universitas Diponegoro
Wiji Mangestiyono orcid scopus  -  Universitas Diponegoro
Galih Satria Hendri Saputra  -  Universitas Diponegoro
Open Access Copyright 2020 Journal of Vocational Studies on Applied Research under http://creativecommons.org/licenses/by-sa/4.0.

Citation Format:
Abstract
The purpose of this research is to analyze the reliability of firewater as a water distribution for emergency conditions.  To determine the remaining useful life (RUL) of the firewater line, this research will apply the counting process so that the rate of remaining useful life (RUL) of the firewater line can be known. The data used as the basis for calculation is failure data gained from technical division databases from 2018. The data obtained will be processed using visual inspection and ultrasonic thickness test methods to produce the remaining useful life of the firewater line. From 5 example fire water lines, only 3 needed to replace of firewater line cause less than 10 years. RUL to 9 years at 10” and 12” Train C/D, 2.45 year at 14” Train C/D, 8 years at 10” and 12” Utilities I.   The mathematical modeling will be verified using visual thickness and ultrasonic Test method to ensure Remaining useful life of firewater line at Badak LNG. Visual inspection refer to API 571 and ultrasonic test refer to API 570 and ASME B31.3
Fulltext View|Download
Keywords: firewater; remaining life; useful life; reliability
Article Info
Section: Articles
Language : EN
Statistics:
Share:
  1. API 570, 2009. Piping Inspection Code: In-service Inspection, Rating, Repair, and Alteration of Piping System, API Publishing Services, Washington DC
  2. API 571, 2003. Damage Mechanisms Affecting Fixed Equipment in the Refining Industry, Washington DC
  3. API 574, 2009. Inspection Practices for Piping System Components, Washington DC
  4. ASME B31.3, 2004. Process Piping, New York
  5. Hamdun, Ibnu. 2011. Laporan Praktikum Non Destructive Testing (NDT) Magnetic Particle Inspection (MPI)
  6. PT Badak LNG, PTB General Specification Piping Material Class
  7. Sudarmawan, Panji. 2013. Laporan Praktikum Non Destructive Testing Ultrasonic Testing (UT)

Last update:

No citation recorded.

Last update:

No citation recorded.