Optimization of clove flower oil extraction (Syzgium aromaticum L.) With Factorial Design Method

Muhammad Asror Muwaffaq; Edy Supriyo

doi:10.14710/jvsar.v3i2.12182

DOI: https://doi.org/10.14710/jvsar.v3i2.12182

Optimization of clove flower oil extraction (Syzgium aromaticum L.) With Factorial Design Method

Muhammad Asror Muwaffaq - Industrial Chemical ENgineering, Vocational School, Diponegoro University, Indonesia

*Edy Supriyo

- Department of Chemical Engineering, Diponegoro University, Indonesia

Citation Format:

Abstract

Solid-liquid extraction or commonly called leaching is the removal of the solute fraction (solute) from a solid to a liquid solvent. This extraction has become a widespread oil extraction process due to the high percentage of oil produced. Soxhletation method is an extraction method that contacts a solid and a liquid by dissolving it in the liquid phase at reflux. Clove oil is an essential oil that can be produced from distillation method on parts of the clove plant, especially the leaves and flowers of cloves. All parts of the clove plant contain oil, but the flowers contain the most oil. Because the leaves and twigs of cloves also produce oil, they also become a side income for clove farmers who harvest clove flowers for cigarettes. One of the most important ingredients in clove oil is eugenol, eugenol has many benefits from antiseptic to stimulant. Isopropyl alcohol is a unwell-known solvent specially to essential oil solvent, isopropyl alcohol is a solvent that can be recovered back into a solvent form usually using distillation method. The selection of isopropyl alcohol as a solvent is based on its high boiling point compared to other solvents and has elements of carbon, hydrogen, and oxygen that can dissolve polar molecules and their alkyl groups.

Fulltext View|Download

Keywords: Clove Oil; Leaching; Soxhletation; Isopropyl Alcohol

Article Metrics:

Article Info

Section: Articles

Language : EN

In Volume 3, Issue 2, Year 2021 (October 2021)

Recent articles

Quality Analysis of Liquid Soap Formulation Made from Virgin Coconut Oil with Addition of White Tea Extract The Optimization of Addition of Bromelain Enzyme Catalyst on the Fermentation of Coconut Milk to VCO (Virgin Coconut Oil) Using Tempeh Yeast The Effectiveness of Biosorbent from Chicken’s Egg Shell and Durian Peel towards the Quality of Biodiesel Product from Waste Cooking Oil More recent articles

Bhutada, P. R., Jadhav, A. J., Pinjari, D. V, Nemade, P. R., & Jain, R. D. (2016). Solvent assisted extraction of oil from Moringa oleifera Lam . seeds. Industrial Crops & Products, 82, 74–80. https://doi.org/10.1016/j.indcrop.2015.12.004
R., S. (2016). Pemisahan eugenol dari minyak cengkeh dengan cara distilasi fraksinasi. 1(1), 1–14
Randriani, H. (2013). KERAGAAN POHON CENGKEH TERPILIH TIPE ZANZIBAR DAN SIPUTIH PALABUHANRATU. 405–410
Rorong, J. A. (2008). UJI AKTIVITAS ANTIOKSIDAN DARI DAUN CENGKEH ( Eugenia Carryophyllus ) DENGAN METODE DPPH. 1(2)
Silviana, Haryani, H. W., Hidayat, N., & Rahmah, L. (n.d.). PEMURNIAN EUGENOL DARI MINYAK DAUN CENGKEH DAN KONSENTRASI ASAM EUGENOL PURIFICATION FROM CLOVE LEAF OIL WITH MONOPROTIC ACIDS REACTANTS . THE STUDY OF TYPE AND CONCENTRATION OF THE ACID REACTANTS Gunung Kawi Sebelah Selatan , Desa reaktan asam monoprotik. 3(2)
Skoog, D. (1996). Analytical Chemistry
Sudarmadji. (1989). Ekstraksi Sokhletasi Minyak Atsiri
Thoha, M. Y., Sitanggang, A. F., & Hutahayan, D. R. S. (n.d.). TEMPERATUR. 16(3), 1–10
Violetta. (2014). ( Clove Oil ) MENGGUNAKAN PELARUT n-HEKSANA DAN BENZENA. 1(2), 25–30
Vivi. (2017). EKTRAKSI MINYAK ATSIRI DARI BUNGA CENGKEH DENGAN PELARUT ETANOL DAN N-HEKSANA. 655–661
Voight. (2011). Teknologi Farmasi 7/23/2001 Voight (p. 6)
Wijaya, C., Jayuska, A., & Alimuddin, A. H. (2015). PENINGKATAN RENDEMEN MINYAK ATSIRI DAUN CENGKEH ( Syzygium aromaticum ) DENGAN METODE DELIGNIFIKASI DAN FERMENTASI. 4(4), 15–20

Last update:

No citation recorded.

Last update:

No citation recorded.

Journal of Vocational Studies on Applied Research are published under the terms of the Creative Commons Attribution-ShareAlike. Authors retain the copyright to their work. Users may read, copy and distribute the work in any medium provided the authors and the journal are appropriately credited.

Below you may find the full text of the license signed by authors.

LICENSE TO PUBLISH

1. License
The non-commercial use of the article will be governed by the Creative Commons Attribution-ShareAlike license as currently displayed on http://creativecommons.org/licenses/by-sa/4.0/. Without prejudice to the foregoing, the author hereby grants Journal of Vocational Studies on Applied Research the exclusive license for commercial use of the article according to section 2 below, and sections 4 through 9 below, throughout the world, in any form, in any language, for the full term of copyright, effective upon acceptance for publication.

2. Author’s Warranties
The author warrants that the article is original, written by stated author/s, has not been published before, contains no unlawful statements, does not infringe the rights of others, is subject to copyright that is vested exclusively in the author and free of any third party rights, and that any necessary written permissions to quote from other sources have been obtained by the author/s.

3. User Rights
Under the Creative Commons Attribution-ShareAlike license, the author(s) and users are free to share (copy, distribute and transmit the contribution).

4. Rights of Authors
Authors retain the following rights:

copyright, and other proprietary rights relating to the article, such as patent rights,
the right to use the substance of the article in future own works, including lectures and books,
the right to reproduce the article for own purposes, provided the copies are not offered for sale,
the right to self-archive the article.

5. Co-Authorship
If the article was prepared jointly with other authors, the signatory of this form warrants that he/she has been authorized by all co-authors to sign this agreement on their behalf, and agrees to inform his/her co-authors of the terms of this agreement.

6. Termination
This agreement can be terminated by the author or Journal of Vocational Studies on Applied Research upon two months’ notice where the other party has materially breached this agreement and failed to remedy such breach within a month of being given the terminating party’s notice requesting such breach to be remedied. No breach or violation of this agreement will cause this agreement or any license granted in it to terminate automatically or affect the definition of Journal of Vocational Studies on Applied Research.

7. Royalties
This agreement entitles the author to no royalties or other fees. To such extent as legally permissible, the author waives his or her right to collect royalties relative to the article in respect of any use of the article by Journal of Vocational Studies on Applied Research or its sublicensee.

8. Miscellaneous
Journal of Vocational Studies on Applied Research will publish the article (or have it published) in the Journal, if the article’s editorial process is successfully completed and Journal of Vocational Studies on Applied Research or its sublicensee has become obligated to have the article published. Journal of Vocational Studies on Applied Research may conform the article to a style of punctuation, spelling, capitalization and usage that it deems appropriate. The author acknowledges that the article may be published so that it will be publicly accessible and such access will be free of charge for the readers. Journal of Vocational Studies on Applied Research will be allowed to sublicense the rights that are licensed to it under this agreement.