skip to main content

PELATIHAN PENGELASAN BAGI MASYARAKAT PEKERJA LEPAS GALANGAN KAPAL DI JAWA TENGAH

*Samuel Febriary Khristyson  -  Department of Tecnology Industry, Universitas Diponegoro, Jl. Prof. Sudarto, SH, Tembalang, Semarang, Indonesia 50275, Indonesia
Sarwoko Sarwoko  -  Department of Tecnology Industry, Universitas Diponegoro, Jl. Prof. Sudarto, SH, Tembalang, Semarang, Indonesia 50275, Indonesia
Sulaiman Sulaiman  -  Department of Tecnology Industry, Universitas Diponegoro, Jl. Prof. Sudarto, SH, Tembalang, Semarang, Indonesia 50275, Indonesia
Bambang Sri Waluyo  -  Department of Tecnology Industry, Universitas Diponegoro, Jl. Prof. Sudarto, SH, Tembalang, Semarang, Indonesia 50275, Indonesia
Indro Dwi Cahyo  -  Department of Tecnology Industry, Universitas Diponegoro, Jl. Prof. Sudarto, SH, Tembalang, Semarang, Indonesia 50275, Indonesia
Albin Abdur Razaq  -  Department of Tecnology Industry, Universitas Diponegoro, Jl. Prof. Sudarto, SH, Tembalang, Semarang, Indonesia 50275, Indonesia
Mikahael Fernandus  -  Department of Tecnology Industry, Universitas Diponegoro, Jl. Prof. Sudarto, SH, Tembalang, Semarang, Indonesia 50275, Indonesia
Open Access Copyright 2021 Jurnal Pengabdian Vokasi

Citation Format:
Abstract
Central Java province has several industries that have various kinds of competencies that must be mastered by every worker. The potential of vocational schools in Indonesia. Increasing the competence of human resources is to increase the choices that humans have. The higher the education, the more opportunities that can be achieved. The purpose of this paper is to explore and facilitate activities to improve the skills of the freelancer community in the shipbuilding industry in Central Java. The method used is the method of collecting data for experiments . By compiling the experimental setting data used, it is adjusted to the reading of the data from the welding process and endeavored to be processed properly. The result with the experimental method is obtained a schematic stage of the welding process with SMAW. By paying attention to the amperage and voltage settings when the welding process is adjusted to pre-preparation before the welding process, good welding results are also obtained so that when visually inspected there are no visible defects in the welding results. However, in the application process, it is necessary to look at the flight time of freelancers in the welding field and the welding position.
Fulltext View|Download
Keywords: SMAW, Sosialitation, Shipyard, Welding, Man Power

Article Metrics:

  1. Cao, Yue, Zhijiang Wang, Shengsun Hu, and Wandong Wang. 2021. “Modeling of Weld Penetration Control System in GMAW-P Using NARMAX Methods.” Journal of Manufacturing Processes 65: 512–24. https://www.sciencedirect.com/science/article/pii/S152661252100205X
  2. Gao, Yanfeng et al. 2020. “Weld Bead Penetration Identification Based on Human-Welder Subjective Assessment on Welding Arc Sound.” Measurement 154: 107475. https://www.sciencedirect.com/science/article/pii/S0263224120300129
  3. Khristyson, Samuel Febriary et al. 2021. “Desain Bilik Disinfektan Guna Mencegah Penularan Covid-19 Di Industri Galangan Kapal.” Jurnal Pengabdian Vokasi 2(1): 22–25
  4. Liu, Y K, W J Zhang, and Y M Zhang. 2014. “A Tutorial on Learning Human Welder’s Behavior: Sensing, Modeling, and Control.” Journal of Manufacturing Processes 16(1): 123–36. https://www.sciencedirect.com/science/article/pii/S1526612513000972
  5. Liu, YuKang, and YuMing Zhang. 2017. “Fusing Machine Algorithm with Welder Intelligence for Adaptive Welding Robots.” Journal of Manufacturing Processes 27: 18–25. https://www.sciencedirect.com/science/article/pii/S1526612517300725
  6. Mercan, Emine, Yusuf Ayan, and Nizamettin Kahraman. 2020. “Investigation on Joint Properties of AA5754 and AA6013 Dissimilar Aluminum Alloys Welded Using Automatic GMAW.” Engineering Science and Technology, an International Journal 23(4): 723–31
  7. https://www.sciencedirect.com/science/article/pii/S2215098619314764
  8. Norrish, John, and Dominic Cuiuri. 2014. “The Controlled Short Circuit GMAW Process: A Tutorial.” Journal of Manufacturing Processes 16(1): 86–92. https://www.sciencedirect.com/science/article/pii/S1526612513000911
  9. Oz, Cemil et al. 2012. “A Performance Evaluation Application for Welder Candidate in Virtual Welding Simulator.” Procedia - Social and Behavioral Sciences 55: 492–501. https://www.sciencedirect.com/science/article/pii/S1877042812039912
  10. Rodríguez-Hernández, T et al. 2020. “First Assessment on the Microstructure and Mechanical Properties of Gtaw-Gmaw Hybrid Welding of 6061-T6 AA.” Journal of Manufacturing Processes 59: 658–67. https://www.sciencedirect.com/science/article/pii/S1526612520306587
  11. Sulaiman, Sulaiman, Solichin Djazuli Said, Samuel Febriary Khristyson, and Indro Dwi Cahyo. 2020. “DESAIN KONSTRUKSI BAR KEEL PADA KAPAL KAYU NELAYAN.” Jurnal Pengabdian Vokasi 1(3): 153–58. https://ejournal2.undip.ac.id/index.php/jpv/article/view/5382 (August 9, 2020)
  12. Wang, Qiyue, Wenhua Jiao, Peng Wang, and YuMing Zhang. 2021. “A Tutorial on Deep Learning-Based Data Analytics in Manufacturing through a Welding Case Study.” Journal of Manufacturing Processes 63: 2–13. https://www.sciencedirect.com/science/article/pii/S1526612520302668
  13. Wu, Di et al. 2021. “In Situ Monitoring and Penetration Prediction of Plasma Arc Welding Based on Welder Intelligence-Enhanced Deep Random Forest Fusion.” Journal of Manufacturing Processes 66: 153–65. https://www.sciencedirect.com/science/article/pii/S1526612521002449
  14. Zhou, Lang et al. 2021. “Comparative Study on Resistance and Displacement Based Adaptive Output Tracking Control Strategies for Resistance Spot Welding.” Journal of Manufacturing Processes 63: 98–108. https://www.sciencedirect.com/science/article/pii/S1526612520302073

Last update:

No citation recorded.

Last update:

No citation recorded.