PENINGKATAN KAPASITAS PRODUKSI KACANG METE MELALUI PERBAIKAN PERALATAN PRODUKSI DAN LINGKUNGAN KERJA

*Sutrisno Sutrisno  -  Universitas Diponegoro, Indonesia
Mohamad Endy Yulianto  -  , Indonesia
Didik Ariwibowo  -  , Indonesia
Open Access Copyright 2023 Jurnal Pengabdian Vokasi

Citation Format:
Abstract
Market driven increasing of fried and roasted cashew nut leads UD. Tiga Saudara to increase its capacity. Improvement of production equipments is one of the effort. Therefore IDBU programme aims to increase the capacity by modification of tray-type-oven, oil-drain spinner, and faster packing machine/sealer. A comprehensive steps is needed to achieve the IDBU programme target, those are: (i) design and fabrication of 20 kg/batch tray-type-oven with ON/OFF temperature control, (ii) design and fabrication of 7,5 kg/batch spinner, (iii) design and fabrication of 200 pack/hour conveyor-sealer, and (iv) realability of the machine. Implementation result of this programme are able to increase the processing capacity of cashew nuts up to 50%
Fulltext View|Download
Keywords: Cashew; oven; spinner; sealer; idbu
Article Info
Section: Articles
Language : ID
Recent articles
PENINGKATAN KREATIVITAS DAN PEREKONOMIAN WARGA DENGAN DIVERSIFIKASI WORTEL MENJADI KERUPUK WORTEL DI DESA LOSARI KECAMATAN SUMOWONO KABUPATEN SEMARANG Sosialisasi dan Pelatihan Pengawasan Pekerjaan Jalan Bagi Perangkat Desa di Kecamatan Tangen Kabupaten Sragen Pendampingan Desain Perencanaan Pengembangan Kawasan Kolam Renang Desa Dukuh Kecamatan Tangen Kabupaten Sragen More recent articles
  1. Ariwibowo D. dkk., 2014. Peningkatan Produktivitas Proses Pengeringan Chip Mocaf Dengan Alat Pengering Tray Resirkulasi.Prosiding Polines Engineering Seminar II 2014. ISBN 978-979-3514-46-8
  2. Ariwibowo D, dan Yulianto M.E. 2013. Simulasi Perpindahan Massa pada Batas Fasa Air-Udara Untuk Pengering Chips MOCAF.Majalah Gema Tekologi 22(1): 31-36
  3. Ariwibowo D, dan Yulianto M.E. 2012. Pemodelan dan Simulasi Proses Pengering Chips MOCAF.Jurnal Metana 6 (2): 7-12
  4. Handayani S.U, Paramita V, Yulianto M.E, dan Senen. 2015. Efficiency of Zeolite adsorption on the Green Tea Production by Fluidized Bed Dryer. Research Journal of Applied Science, Engineering and Technology. 9(12): 1128-1131
  5. Ketaren, S. 1986. Minyak dan Lemak Pangan. UNI-Press, Jakarta
  6. Mujumdar A.S, Kudra T. 2002. Advanced Drying Technologies.Marcel Dekker. Inc. Basel. Switzerland
  7. Paramita V, Iida K, Yoshii H, Furuta T. 2010a. Effect of feed liquid temperature on the structural morphologies of spray-dried powder and its preservation.Journal of Food Science.75(1): E39-E45
  8. Paramita V, Iida K, Yoshii H, Furuta T. 2010b. Effect of additives on the morphology of spray-dried powder.Drying Technology. 28(3): 323-329
  9. https://www.pertanian.go.id/home/?show=page&act=view&id=61 Jambu mete DEPTAN

Last update:

No citation recorded.

Last update:

No citation recorded.