Departemen Ilmu Kelautan, Fakultas Perikanan dan Ilmu kelautan, Universitas Diponegoro, Indonesia
BibTex Citation Data :
@article{JKT844, author = {Subagiyo Subagiyo and Ria Nuraeni and Wilis Setyati and Adi Santoso}, title = {Optimasi Suhu Dan Ph Pertumbuhan Lactococus Lactic Isolat Ikan Kerapu}, journal = {Jurnal Kelautan Tropis}, volume = {19}, number = {2}, year = {2016}, keywords = {Lactococcus lactis; temperature; pH; growth; Lactococcus lactis; suhu; pH; pertumbuhan}, abstract = { Temperature and pH is one of the environmental factors that influence microbial growth, so it needs to be optimized in order to obtain optimum values for cell production. The experiments were performed using the medium of ROGOSA and Sharpe (MRS). The pH value is set with the addition of 1 N NaOH and 1N HCl to obtain a pH value of 4, 5, 6, 7, and 8. Optimization of temperature performed by incubation at 25, 30, 35 and 40 o C. Bacterial growth was measured by changes in optical density at 600 nm wave-lengh. The results showed that the initial pH of 7 is the initial pH value which produces the most rapid growth, while the initial pH 4 provides the slowest growth. Temperature that produces the most rapid growth is 30 and 35 ° C while the temperature 40 o C produce the slowest growth. Suhu dan pH merupakan salah satu faktor lingkungan yang berpengaruh terhadap pertumbuhan mikrobia, sehingga perlu untuk dilakukan optimasi guna mendapatkan nilai-nilai yang optimum untuk produksi sel. Percobaan dilakukan menggunakan medium deMan, Rogosa and Sharpe (MRS). Nilai pH diatur dengan penambahan NaOH 1 N dan HCL 1N hingga diperoleh nilai pH 4, 5, 6, 7, dan 8.. Optimasi suhu dilakukan dengan inkubasi pada suhu 25, 30, 35 dan 40 o C . Pertumbuhan bakteri diukur berdasarkan perubahan optical density pada panjang geliombang 600 nm. Hasil penelitian menunjukkan bahwa pH awal 7 merupakan nilai pH awal yang menghasilkan pertumbuhan yang paling cepat sedangkan pH awal 4 memberikan pertumbuhan yang paling lambat. Suhu yang menghasilkan pertumbuhan paling cepat adalah 30 dan 35 o C sedangkan suhu 40 o C menghasilkan pertumbuhan yang paling lambat. Kecepatan agitasi yang menghasilkan pertumbuhan paling cepat adalah 100 rpm dan paling lambat 150 rpm. }, issn = {2528-3111}, pages = {166--170} doi = {10.14710/jkt.v19i2.844}, url = {https://ejournal2.undip.ac.id/index.php/jkt/article/view/844} }
Refworks Citation Data :
Temperature and pH is one of the environmental factors that influence microbial growth, so it needs to be optimized in order to obtain optimum values for cell production. The experiments were performed using the medium of ROGOSA and Sharpe (MRS). The pH value is set with the addition of 1 N NaOH and 1N HCl to obtain a pH value of 4, 5, 6, 7, and 8. Optimization of temperature performed by incubation at 25, 30, 35 and 40 oC. Bacterial growth was measured by changes in optical density at 600 nm wave-lengh. The results showed that the initial pH of 7 is the initial pH value which produces the most rapid growth, while the initial pH 4 provides the slowest growth. Temperature that produces the most rapid growth is 30 and 35 ° C while the temperature 40oC produce the slowest growth.
Suhu dan pH merupakan salah satu faktor lingkungan yang berpengaruh terhadap pertumbuhan mikrobia, sehingga perlu untuk dilakukan optimasi guna mendapatkan nilai-nilai yang optimum untuk produksi sel. Percobaan dilakukan menggunakan medium deMan, Rogosa and Sharpe (MRS). Nilai pH diatur dengan penambahan NaOH 1 N dan HCL 1N hingga diperoleh nilai pH 4, 5, 6, 7, dan 8.. Optimasi suhu dilakukan dengan inkubasi pada suhu 25, 30, 35 dan 40 oC . Pertumbuhan bakteri diukur berdasarkan perubahan optical density pada panjang geliombang 600 nm. Hasil penelitian menunjukkan bahwa pH awal 7 merupakan nilai pH awal yang menghasilkan pertumbuhan yang paling cepat sedangkan pH awal 4 memberikan pertumbuhan yang paling lambat. Suhu yang menghasilkan pertumbuhan paling cepat adalah 30 dan 35 oC sedangkan suhu 40oC menghasilkan pertumbuhan yang paling lambat. Kecepatan agitasi yang menghasilkan pertumbuhan paling cepat adalah 100 rpm dan paling lambat 150 rpm.
Article Metrics:
Last update:
Upon acceptance for publication, authors agree to transfer the copyright of their article to Jurnal Kelautan Tropis, while retaining the right to reuse their work under the terms of the open license applied.
From the date of publication, the copyright for each article is held by Jurnal Kelautan Tropis. This transfer allows the journal to manage, disseminate, and preserve scholarly content in accordance with international standards and open access best practices.
Although copyright is held by the journal, all published articles are made available under the Creative Commons Attribution-ShareAlike 4.0 International License (CC BY-SA 4.0). Under this license, anyone may:
Copy and redistribute the material in any medium or format
Remix, transform, and build upon the material for any purpose, even commercially
provided that:
Appropriate credit is given to the original author(s) and the source
Indications are made of any changes that were made
Derivative works are distributed under the same license (CC BY-SA 4.0)
While copyright is held by the journal, authors retain important reuse rights. Authors may:
Reuse the published version of their article in future works, including books, compilations, and lectures
Deposit the published version in institutional or subject repositories
Share the article freely, including on personal websites or academic networks
as long as the original publication in Jurnal Kelautan Tropis is cited and the CC BY-SA 4.0 license terms are respected.
Authors must ensure that any third-party content included in the article (e.g., figures, images, datasets) is either original, in the public domain, or licensed for reuse under compatible terms. If specific permissions are required, authors must obtain them prior to submission.
For questions regarding copyright or licensing, please contact the editorial office at: j.kelautantropis@gmail.com
View My Stats
Jurnal Kelautan Tropis is published by Departement of Marine Science, Faculty of Fisheries and Marine Science, Universitas Diponegoro under a Creative Commons Attribution-ShareAlike 4.0 International License.