Analisis Risiko di Area Switchyard PT.PLN Gardu Induk Kosambi Menggunakan Metode HIRARC

Muhammad Suryomukti; Yuliarman Saragih

doi:10.14710/jebt.2024.22625

DOI: https://doi.org/10.14710/jebt.2024.22625

Analisis Risiko di Area Switchyard PT.PLN Gardu Induk Kosambi Menggunakan Metode HIRARC

Muhammad Suryomukti

, Yuliarman Saragih

Jurusan Teknik Elektro, Universitas Singaperbangsa KarawangJl. HS.Ronggo Waluyo, Puseurjaya, Telukjambe Timur, Karawang, Jawa Barat 41361, Indonesia

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Citation Format:

Abstract

Kecelakaan kerja tidak hanya berdampak pada korban tetapi juga menimbulkan kerugian. Untuk mengurangi kerugian akibat kecelakaan, penerapan Sistem Manajemen Keselamatan dan Kesehatan Kerja (SMK3) diperlukan agar kecelakaan dapat dicegah dan dikendalikan dengan baik. Penelitian ini dilakukan pada proyek di daerah dengan tegangan tinggi yang memiliki risiko bahaya yang perlu diperhatikan. Metode yang digunakan untuk mengetahui besarnya dampak risiko yang mungkin terjadi adalah Hazard Identification, Risk Analysis, and Risk Control (HIRARC), serta pendekatan melalui wawancara langsung dengan pekerja. Penelitian ini mengidentifikasi 23 risiko dari 20 kegiatan pemeliharaan dan pengujian. Berdasarkan penilaian risiko, risiko yang mungkin terjadi di switchyard Gardu Induk PT.PLN Kosambi terdiri dari 4 risiko Low Risk (17,5%), 16 risiko Moderate Risk (69,5%), dan 3 risiko High Risk (13%). Tingkatan risiko ini digunakan untuk mengembangkan pengendalian untuk semua risiko yang mungkin terjadi.

Fulltext View|Download

Keywords: HIRARC, SMK3, Risiko, Switchyard

Funding: U

Article Metrics:

Article Info

Section: Articles

Language : ID

In Vol 5, No 2 (2024): Juli 2024

Recent articles

Peningkatan Kecepatan Start up dan Kemurnian Metana Dalam Pengolahan Limbah Organik Cair Menggunakan Rraktor Fixed Terimobilisasi Karbon Aktif Pembiayaan Ramah Lingkungan Terhadap Sub Sektor Energi Baru Dan Terbarukan Di Indonesia Analisis Risiko di Area Switchyard PT.PLN Gardu Induk Kosambi Menggunakan Metode HIRARC More recent articles

Abryandoko, E. W. (2018). Dengan Menggunakan Metode Hirarc Dan Safety. Jurnal Rekayasa Sipil, 12(1), 50–57
Balili, S., & Yuamita, F. (2022). Analisis Pengendalian Risiko Kecelakaan Kerja Bagian Mekanik Pada Proyek PLTU Ampana (2x3 MW) Menggunakan Metode Job Safety Analysis (JSA). Jurnal Teknologi Dan Manajemen Industri Terapan, 1(2), 61–69. https://doi.org/10.55826/tmit.v1iii.14
Benny Suherman, Andung Luwihono, S. R. (2022). Buku Ajar Konversi Energi Listrik. Kita Menulis
Campbell, James B., 1944. (2012). Peraturan Pemerintah (PP) Nomor 50 Tahun 2012 tentang Penerapan Sistem Manajemen Keselamatan Dan Kesehatan Kerja. In עלון הנוטע (Vol. 66, pp. 37–39)
Drs. Irzal, M. K. (2016). Dasar-Dasar Kesehatan dan Keselamatan Kerja. Kencana
Ghaisani, H., & Nawawinetu, E. D. (2014). IDENTIFIKASI BAHAYA , PENILAIAN RISIKO DAN PENGENDALIAN RISIKO PADA PROSES BLASTING DI PT CIBALIUNG SUMBERDAYA , BANTEN Hazyiyah Ghaisani , Erwin Dyah Nawawinetu PENDAHULUAN Pertambangan adalah suatu kegiatan pengambilan endapan bahan galian berharga dan. The Indonesian Journal of Occupational Safety and Health, 3(1), 107–116
Kementerian Ketenagakerjaan. (2014). Peraturan Menteri Ketenagakerjaan Republik Indonesia Nomor 26 Tahun 2014 tentang Penyelenggaraan Penilaian Penerapan Sistem Manajemen Keselamatan dan Kesehatan Kerja. Kementerian Ketenagakerjaan, 1–26
Pariatamby, A. M. S. and J. J. T. and A. (2014). A HIRARC model for safety and risk evaluation at a hydroelectric power generation plant. Safety Science, 70(0925–7535), 308–315. https://doi.org/{https://doi.org/10.1016/j.ssci.2014.05.013},
Pertiwi, S. R., Latifa, U., Hidayat, R., & Ibrahim, I. (2021). Analisis Kelayakan CVT (Capacitive Voltage Transformer) Phasa S Bay Busbar 2 150 kV di GI PT. XYZ Indonesia. Techné : Jurnal Ilmiah Elektroteknika, 20(1), 35–42. https://doi.org/10.31358/techne.v20i1.259
Ramadhan, F. (2017). Analisis Kesehatan dan Keselamatan Kerja (K3) menggunakan metode Hazard Identification Risk Assessment and Risk Control (HIRARC). Seminar Nasional Riset Terapan, November, 164–169
Saputro, T. A., & , Agus Supardi, S.T., M. . (2018). Analisis Hasil Pengujian Tahanan Isolasi Transformator DayaBerdasarkan Hasil Uji Indeks Polarisasi, Tangen Delta, Rasio Tegangan, BDV(Break Down Voltage)
Sugiarto, A. (2015). Pemakaian Dan Pemeliharaan Transformator Arus (Current Transformer/CT). Forum Teknologi, 05(1), 1–7. . Buku Petunjuk Batasan Operasi dan Pemeliharaan Peralatan Penyaluran Tenaga%0AListrik SKDIR 114.K/DIR/2010 Trafo Arus No. Dokumen: 02-22/HARLUR-PST/2009
Tambunan, J. M., & Widhyastuti. (2017). Pengujian Rutin Trafo Arus 24 kV di Laboratorium Hubung Singkat PT.PLN (Persero) Puslitbang Ketenagalistrikan. Jurnal Sutet, 7(2), 34–43
Wisudawati, N., & Patradhiani, R. (2020). Analisis Risiko Keselamatan dan Kesehatan Kerja (K3) dengan Metode Hazard Analysis (Studi Kasus pada Proyek Pembangunan Perumahan). Integrasi : Jurnal Ilmiah Teknik Industri, 5(1), 29. https://doi.org/10.32502/js.v5i1.2971
Wonmaly, M. L., & Jamlaay, M. (2023). IDENTIFICATION RISK ASSESMENT AND RISK CONTROL ( HIRARC ). 4(2), 127–136

Last update:

No citation recorded.

Last update:

No citation recorded.

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

The authors submitting a manuscript do so on the understanding that if accepted for publication, the article's copyright shall be assigned to Jurnal Energi Baru dan Terbarukan (JEBT) and Master Program of Energy, Universitas Diponegoro. Copyright encompasses rights to reproduce and deliver the article in all forms and media, including reprints, photographs, microfilms, and other similar reproductions and translations.

As an article writer, the authors have the right to use their articles for various purposes, including by institutions that employ authors or institutions that provide funding for research. Author rights are granted without special permission.

Authors who publish a paper at JEBT have the broad right to use their work for teaching and scientific purposes without the need to ask permission, including used for (i) teaching in the author's class or institution, (ii) presentation at meetings or conferences and distributing copies to participants ; (iii) training conducted by the author or author's institution; (iv) distribution to colleagues for research use; (v) use in the compilation of subsequent authors' works; (vi) inclusion in a thesis or dissertation; (vi) reuse of part of the article in another work (with citation); (vii) preparation of derivative works (with citation); (viii) voluntary posting on open websites operated by authors or author institutions for scientific purposes (following the CC BY-SA License).

Reproduce any part of this journal, its storage in the database, or its transmission by all forms of media is permitted and does not need written permission from the JEBT journal. However, it should be cited as an honor in academic manners by providing appropriate credit (provide article citation or content), links to the license, and indicating if there are changes.

JEBT journal and the Master Program of Energy, Universitas Diponegoro, and the Editor make every effort to ensure that there are no data, opinions, or false or misleading statements published in the JEBT journal. However, the article's content is each author's sole and exclusive responsibility.

The Copyright Transfer Form can be downloaded here: [Copyright Transfer Form]. The copyright form should be signed originally and sent to the Editor via email or fax.