DOI: https://doi.org/10.14710/potensi.2023.18390

PENGARUH PERSENTASE CAMPURAN SERAT DAUN NANAS DAN CANGKANG KERANG DARAH TERHADAP INOVASI PAPAN PARTISI PENYEKAT RUANGAN

*Nurul Afifah Amalia  -  Departement of Civil infrastructure engineering and Architectural Design, Vocational School, Diponegoro University, Jl. Prof. Sudarto, SH, Tembalang, Semarang, Indonesia 50275, Indonesia
Sheny Widyasari  -  Departement of Civil infrastructure engineering and Architectural Design, Vocational School, Diponegoro University, Jl. Prof. Sudarto, SH, Tembalang, Semarang, Indonesia 50275, Indonesia
Bambang Setiabudi  -  Departement of Civil infrastructure engineering and Architectural Design, Vocational School, Diponegoro University, Jl. Prof. Sudarto, SH, Tembalang, Semarang, Indonesia 50275, Indonesia
Shifa Fauziyah  -  Departement of Civil infrastructure engineering and Architectural Design, Vocational School, Diponegoro University, Jl. Prof. Sudarto, SH, Tembalang, Semarang, Indonesia 50275, Indonesia

Citation Format:
Abstract

Indonesia's increasing population is a crucial problem. According to the Central Bureau of Statistics (2021), Indonesia's population growth in 2020 will increase by 32.56 million people. In line with the need for housing in Indonesia, as a result the available land is decreasing, so many housing developments use partitions. However, partitions on the market still have many drawbacks. Utilization of pineapple leaf fiber as a substitute for fiber and blood clam shell waste as a substitute for cement is certainly a solution to this problem. Where pineapple leaf fiber has a carbon content such as 23.39% cellulose, 42.72% hemicellulose, and 4.03% lignin. Blood clam shells contain Sio2 of 8.252% and CaCO3 ranging from 66-98%. The purpose of this study was to determine the effect of the use of these two materials on the partition characteristics produced through physical tests and mechanical test. Samples were made in laboratory studies with variations of pineapple leaf fiber subs 0%;30%;70%;100% with the number of samples for each mold size being 3 samples. Through the results of tests that have been carried out, the best variation of pineapple leaf fiber substitution is the 70% variation. This test was also carried out by comparing several commercial partitions (gypsum, kalsiboard and GRC).

Fulltext View|Download

Article Metrics:

Article Info
Section: Research Article
Language : ID
Recent articles
ANALISIS PERHITUNGAN ESTIMASI BIAYA PADA RUMAH TINGGAL 2 LANTAI MENGGUNAKAN MATERIAL KONTAINER OBSERVASI DIAPHRAGM WALL METODE CUT OFF WALL SEBAGAI PENANGANAN REMBESAN WILAYAH WADUK CENGKLIK. PENGARUH SOSIALISASI KESADARAN BERKESELAMATAN DI JALAN DALAM MEMBANGKITKAN SIKAP SAFETY RIDING PADA GENERASI Z More recent articles
  1. Abdillah, M. (2016). Studi Material Poliester-Gypsum Berpenguat Serat Ampas Tebu Dan Bambu Betung Untuk Aplikasi Bahan Akustik Yang Tidak Mudah Terbakar. Tugas Akhir. Departemen Teknik Material dan Metalurgi, Fakultas Teknologi Industri. Institut Teknologi Sepuluh November
  2. Andika, R., & Safarizki, H. A. (2019). Pemanfaatan Limbah Cangkang Kerang Dara (Anadara Granosa) Sebagai Bahan Tambah Dan Komplemen Terhadap Kuat Tekan Beton Normal. MoDuluS: Media Komunikasi Dunia Ilmu Sipil, 1(1), 1. https://doi.org/10.32585/modulus.v1i1.374
  3. ASTM Internasional. (2019). ASTM E 1050-19. Standard Test Method for Impedance and Absorption of Acoustical Materials Using a Tube, Two Microphones and a Digital Frequency Analysis System. United States : ASTM International
  4. ASTM Internasional. (2022). ASTM D 635-22. Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position. United States : ASTM International
  5. Badan Pusat Statistik Jakarta Pusat. (2021). Hasil Sensus Penduduk 2020. Jakarta Pusat : Badan Pusat Statistik
  6. Badan Standarisasi Nasional. (2006). SNI 01-4449-2006. Mutu Papan Serat. Jakarta: Badan Standarisasi Nasional
  7. Fathurrahman, H., Neolaka, A., & Arthur, R. (2020). Perbandingan Papan Gipsum Serat Daun Nanas (Ananas Comosus L. Merr) Terhadap Papan Gipsum Komersil Dilihat Dari Sifat Fisis Dan Mekanis Berdasarkan Sni Spesifikasi Panel Atau Papan Gipsum 03-6384-2000. Jurnal Pendidikan Teknik Dan Vokasional, 3(2), 121–130. https://doi.org/http://doi.org/10.21009/JPTV.3.2.121
  8. Haikal, M., & Firdaus. (2019). Pemanfaatan Limbah Kulit Kerang Darah Sebagai Substitusi Semen Pada Mortar. Jurnal TEKNO (Civil Engineeering, Elektrical Engineeering and Industrial Engineeering), 16(April), 1
  9. Hardiyanti. (2019). Pengujian Kerapatan, Kadar Air Dan Koefisien Absorbsi Papan Akustik Dengan Menggunakan Bahan Dasar Daun Lontar (Borassus Flabellifer). Skripsi. Departemen Fisika, Fakultas Sains dan Teknologi. Universitas Islam Negeri Alauddin Makassar
  10. Hermawan, F., Sejati, W., Zaki, M., & Jefri, A. (2022). Estimasi Perbandingan Pekerjaan Dinding Panel GRC Dan Bata Ringan Untuk. Sainstek E-Journal STT Pekanbaru, 10(2), 200–205. https://doi.org/10.35583/js.v10i2.161
  11. Japanese Industrial Standar. (1992). JIS A 5417-1992. Cement Bonded Particle Boards. Japan: Japanese Industrial Standar
  12. Leão, A.L., Cherian, B.H., Narine, S., Souza, S., Sain, M., dan Thomas, S.(2015). “The Use of Pineapple Leaf Fibers (PALFs) As Reinforcements In Composites”, Biofiber Reinforcement in Composite Materials, 211-235. https://doi.org/10.1533/9781782421276.2.211
  13. Maail, R. S., & Derlauw, I. (2020). Sifat Fisis Dan Keunggulan Papan Semen Dari Limbah Kulit Batang Sagu. MAKILA:Jurnal Penelitian Kehutanan, 14(2), 87–98. https://doi.org/10.30598/makila.v14i2.2895
  14. Nandiyanto, A. B. D., Girsang, G. C. S., Maryanti, R., Ragadhita, R., Anggraeni, S., Fauzi, F. M., Sakinah, P., Astuti, A. P., Usdiyana, D., Fiandini, M., Dewi, M. W., & Al-Obaidi, A. S. M. (2020). Isotherm adsorption characteristics of carbon microparticles prepared from pineapple peel waste. Communications in Science and Technology, 5(1), 31–39. https://doi.org/10.21924/cst.5.1.2020.176
  15. Oktaviani, S., & Puryati, D. (2020). Pengaruh Penambahan Serat Daun Nanas terhadap Sifat Fisis dan Mekanik Papan Semen Gipsum. Jurnal Fisika Unand, 9(1), 31–37. https://doi.org/10.25077/jfu.9.1.31-37.2020
  16. Puspitarini, Y., S, F. M. A., Yulianto, A., & Fisika. (2014). Koefisien Serap Bunyi Ampas Tebu Sebagai Bahan Peredam Suara. Jurnal Fisika, 4(2), 96–100
  17. Ramdani, I. B., Pratama, J. H., Santosa, F. J., & Hartono, W. (2019). Cangkang Pila Ampullacea dan Blotong Tebu Sebagai Bahan Pembuatan Smart-Partisi. Jurnal Riset Rekayasa Sipil, 3(1), 28. https://doi.org/10.20961/jrrs.v3i1.34721
  18. S, Anton. (2012). Pembuatan Dan Uji Karakteristik Papan Partikel Dari Serat Buah Bintaro (Cerbera Manghas). Skripsi. Departemen Teknik Sipil dan Lingkungan, Fakultas Teknologi Pertanian. Institut Pertanian Bogor
  19. Tasari, F. T. (2022). Analisis Cangkang Kerang Darah (Anadara granosa) sebagai Sumber CaCO3 pada Pembuatan Ubin Keramik Dinding. Prisma Fisika, 10(3), 352–359

Last update:

No citation recorded.

Last update:

No citation recorded.