Online Submissions

Registration and login are required to submit items online and to check the status of current submissions.

Already have a Username/Password for Jurnal Proyek Teknik Sipil?

Need a Username/Password?

Author Guidelines

Focus and scope
Jurnal Proyek Teknik Sipil (POTENSI) receives the manuscript covering the original research (preferable), literature review, or case study including:

• Construction and building material
• Construction management
• Geotechnical engineering
• Highway and transportation engineering
• Hydraulic and water resource engineering
• Structural engineering

Manuscript Preparation
The submitted manuscript is an original manuscript that has not been published in any journal and is not in the process of being submitted to another journal. Manuscripts result from original research and do not violate copyright or other rights. All data and information presented in the manuscript have been verified and analyzed. Manuscripts can be written in Indonesian or English according to the correct writing rules. Manuscripts are written in Microsoft Word format.

Manuscript Format
Manuscripts in general should be organized in the following order: Title, Abstract, Introduction, Materials and Methods, Results and Discussion, Conclusion, Acknowledgements (optional) and References. Download the POTENSI layout template here. 

TITLE
The title should be clearly written and represent the research. The title of the manuscript is written in capital letters at the beginning (Sentence case) font 14 cambria bold and align left.

AUTHOR'S NAME
The author's name writing is not followed by an academic degree but by the institution's origin and one or more emails.

ABSTRACT
The Abstract should stand alone, meaning there is no citation in the Abstract. Consider it the advertisement of your article. The Abstract should tell the prospective reader what you did and highlight the key findings. Avoid using technical jargon and uncommon abbreviations. You must be accurate, brief, clear, and specific. Use words that reflect the precise meaning; theAbstract should be exact and honest. Please follow word limitations (100‐250 words). Keywords are the labels of your manuscript and are critical to correct indexing and searching. Therefore, the keywords should represent the content and highlight of your article by several 3-5 keywords. Use only those abbreviations that are firmly established in the field. e.g. GIS (cambria 10 pt, italic).

INTRODUCTION
In the Introduction, the Author must state the purpose of the work at the end of the introductory section. Before the objective, the Author should provide an adequate background and a brief literature study to explain the solutions and methods available, show the differences from the previous research, show the main limitations of prior research, show what is done (the expectations to be achieved to solve the limitations), and demonstrate scientific achievements or novelties from your study. (Cambria, 11 pt).

METHODS
Data and methods must enable the reader to reproduce the analysis. Provide detailed concepts and techniques to allow the work to be copied. Published methods should be referenced; any relevant modifications must be explained. For images, the sequential numbers should start from 1, with the figure title and number below the picture. (Cambria 11pt)

RESULTS AND DISCUSSION
The results should be clear and concise. The results should summarize the (scientific) findings from the detailed data analysis. Please highlight the differences between the results or conclusions and previous publications by other researchers. For tables, they are in order of numbers with the table title and the number above the table. The table should be centered in the center of the Page.

CONCLUSION
The conclusion must answer the purpose of the research. Please tell us your work and findings in the field from the latest knowledge. Without a clear conclusion, readers will find it difficult to judge and adapt the work so that they will feel less benefiting from this publication.

ACKNOWLEDGEMENT (*if any)
Thanks are expressed to those who helped in the research, especially to the funding sponsors who supported this research (individuals/companies/institutions). This thanks is not like in the Final Project Foreword. Only those involved in this article feel grateful.

REFERENCES
Cite a major scientific publication based on your work with the APA 6th Style. Cite items you've read. Don't expand the manuscript with too many references. Avoid excessive citations against the article itself. Avoid excessive citations from publications in the same area. Check each reference to the source (author's name, volume, issue, year). Please use the Reference Manager Applications such as EndNote, Mendeley, Zotero, etc. All publications cited in the text should be included as reference lists. Sequential number reference as it appears in the text. Ensure that any references cited in the text are also in the reference list (and vice versa). Use references from journals for at least 80% of the total references.

Here is an example of a bibliography writing citation:

Journal Article:

• Smith, J. A., & Johnson, L. M. (2022). Analysis of Structural Integrity in Modern Bridge Design. Journal of Civil Engineering, 45(3), 215-230. doi:10.1016/j.jce.2022.01.003
• Zhang, Y., & Wang, H. (2020). Sustainable materials in civil engineering: A review. Construction and Building Materials, 250, 118-125. https://doi.org/10.1016/j.conbuildmat.2020.118125

Books:

• Kusnadi, A. (2018). Fundamentals of Civil Engineering. Jakarta: Engineering Publishing.
• McCormac, J. A., & Nelson, J. K. (2015). Structural Analysis. New York, NY: Wiley.

Website Articles:

• Budi, R. (2021). Innovations in construction materials. Retrieved from https://www.constructioninnovation.com/article/innovations-materials
• American Society of Civil Engineers. (2023). Civil engineering and the future of infrastructure. Retrieved from https://www.asce.org/civil-engineering-future

Guideline for Online Submission

The Author should first register as an Author Role through the following website: Jurnal Proyek Teknik Sipil

The Author should fill out the form in as much detail as possible, including where the star-marked form must be entered. After filling out all form textboxes, theAuthor clicked the "Register" button to proceed with the registration. Therefore, Author is brought to the online author submission interface, where the Author should click "New Submission". In the Start, a New Submission section, click"' Click Here' to go to step one of the five-step submission processes." The following are five steps in the online submission process:

1. Step 1 - Starting the Submission: Select the appropriate section of the journal, i.e., Original Research Articles, Review Articles, Short Communication, or Letter to the Editor. Thus, the Author must check the submission checklists. An author should type or copy-paste the texts of the cover letter into aLetter to the Editor.
2. Step 2 – Uploading the Submission: To upload a manuscript MS Word file to this journal (do not upload as a PDF file), click Browse on the Upload submission file item and choose the manuscript document file (.docx) to be submitted, then click "Upload" button until the file has been uploaded successfully. NOTE: Do not upload a cover letter and other supplementary files here.
3. Step 3 – Entering Submission's Metadata: Detailed Author's metadata should be entered, including the marked corresponding Author. NOTE: The Author must enter all author data here, not only the corresponding Author. After that, the manuscript title and abstract must be uploaded by copying the text and pasting it into the textbox, including keywords.
4. Step 4 – Uploading Supplementary Files: Supplementary file should be uploaded including Covering/Submission Letter, and Signed Copyright Transfer Agreement Form. Therefore, click on Browse button, choose the files, and then click on Upload button.
5. Step 5 – Confirming the Submission:  The Author should final check the uploaded manuscript documents in this step. To submit the manuscript to the BCREC journal, click the Finish Submission button after the documents are valid. The corresponding Author or the principal contact will receive an acknowledgment email for submission. It can view the submission's editorial progress by logging in to the journal web address site. 

After this submission, the authors who submit the manuscript will automatically get a confirmation email about the submission. Therefore, Authors can track their submission status at any time by logging in to the online submission interface. The submission tracking includes the status of the manuscript review and editorial process.

Submission Preparation Checklist

As part of the submission process, authors are required to check off their submission's compliance with all of the following items, and submissions may be returned to authors that do not adhere to these guidelines.

1. The submission has not been previously published, nor is it before another journal for consideration (or an explanation has been provided in Comments to the Editor).
2. The submission file is in OpenOffice, Microsoft Word, RTF, or WordPerfect document file format.
3. Where available, URLs for the references have been provided.
4. The text is single-spaced; uses a 11-point font; cambria, rather than underlining (except with URL addresses); and all illustrations, figures, and tables are placed within the text at the appropriate points, rather than at the end.
5. The text adheres to the stylistic and bibliographic requirements outlined in the Author Guidelines, which is found in About the Journal.
6. If submitting to a peer-reviewed section of the journal, the instructions in Ensuring a Blind Review have been followed.

Copyright Notice

All articles published in Open Access format will be free to read and download by anyone, with no time limit. The author understands that the article submitted and accepted for publication will have its copyright assigned to the publisher. This copyright includes the rights to distribute the article in various forms and media.

Privacy Statement

The names and email addresses entered in this journal site will be used exclusively for the stated purposes of this journal and will not be made available for any other purpose or to any other party.

Author Fees

This journal charges the following author fees.

Article Submission: 0.00 (IDR)
Authors are required to pay an Article Submission Fee as part of the submission process to contribute to review costs.

Article Publication: 150000.00 (IDR)
If this paper is accepted for publication, you will be asked to pay an Article Publication Fee to cover publications costs.

If you do not have funds to pay such fees, you will have an opportunity to waive each fee. We do not want fees to prevent the publication of worthy work.