Multi Criteria Decision Making for the Preparation of Sustainability Indicators for the Printing Sector Industry

Febrina Agusti, Ringgo Ismoyo Buwono, Fertilio Dwyanton, Adit Tri Wahyono


DOI: https://doi.org/10.14710/jsp.2025.25868

Abstract


The government encourages industry players to continue to innovate and be sustainable in accordance with the commitment of the Ministry of Industry of the Republic of Indonesia. Industrial sustainability itself requires careful planning such as indicators and strategy formulation. Currently, the large number of industries in various sectors has given rise to fierce competition. The printing industry sector was an industry with significant development of 10 percent since 2019-2024. The purpose of this study was to develop indicators of industrial sustainability that were implemented in the printing sector in Surakarta City. The methods used were the Delphi Method and the Multi-Criteria Decision Making (MCDM) Method. The respondents of this study were PT Margo Mitro Joyo and PT Putra Nugraha Sentosa. The results of the study can produce 22 indicators of industrial sustainability, while also determining the level of sustainability of the printing sector industry in Surakarta in the good category.

Full Text:

PDF

References


Purwaningsih, R., Agusti, F., Nugroho, W. P. S., Susanty, A., and Purwanggono, B., "Assessment sustainable tourism: A literature review composite indicator," in ICENIS, Indonesia, 2020.

Purwaningsih, R., Ameliafidhoh, Z., Susanty, A., Pramono, S. N. W., and Agusti, F., "Sustainability Status Assessment of The Borobudur Temple using The Rap-Tourism with Multi-Dimensional Scaling (MDS) Approach," in ICENIS, Indonesia, 2021.

Tsvetkova, D., Bengtsson, E., and Durst, S., "Maintaining sustainable practices in SMEs: Insights from Sweden. Sustainability," Switzerland, vol. 12, no. 24, pp. 1-26, 2020.

Chen, D., Thiede, S., Schudeleit, T., and Herrmann, C., "A holistic and rapid sustainability assessment tool for manufacturing SMEs," CIRP Annals - Manufacturing Technology, vol. 63, no. 1, pp. 437-440, 2014.

Jayasundara, J., Rajapakshe, P., Prasanna, R., Gamage, S. K. N., Ekanayake, E., and Abeyrathne, G., "The Nature of Sustainability Challenge in Small and Medium Enterprises and its Management," Munich Personal RePEc Archive Rajarata University, Sri Lanka, 2019.

Bayraktar, M., and Algan, N., "The Importance Of SMEs On World Economies," in International Conference on Eurasian Economies 500, Eurasia, 2019.

Agusti, F., Saputro, F. W., Utami, I. W., and Dwyanto, F., "Multi-criteria decision making for SMEs sustainability assessment," in Proceeding of International Conference on Science, Health, And Technology, Indonesia, 2022.

Schaper, M. T., "The Missing (Small) Businesses of Southeast Asia," ISEAS Yusof Ishak Institute Perspective, vol. 79, no. 79, pp. 1-11, 2020.

Pratama, A., "Smes-backbone-southeast-asias-growing-economy," 2019. [Online]. Available: https://www.ifac.org/knowledge-gateway/contributing-global-economy/discussion/smes-backbone-southeast-asias-growing-economy.

Challenge, T., "Strengthening Regional Structures for Small and Medium Enterprises Promotion in ASEAN," 2022. [Online]. Available: https://www.giz.de/de/downloads/giz-2022-en-asean.pdf.

Chen, D., Schudeleit, T., Posselt, G., and Thiede, S., "A state-of-the-art review and evaluation of tools for factory sustainability assessment," in 2nd CIRP Global Web Conference, Sweden, 2013.

Henriques, R., Figueiredo, F., and Nunes, J., "Product Services for a Resource-Efficient and Circular Economy: A Updated Review," Journal of Cleaner Production, vol. 15, no. 15, pp. 1-24, 2015.

KompasIndo, "Percetakan Indonesia Tumbuh Pesat, Surabaya Printing Expo 2024 Siap Gelar," 2024. [Online]. Available: https://kompasindo.co.id/2024/07/industri-percetakan-indonesia-tumbuh-pesat-surabaya-printing-expo-2024-siap-digelar/.

Ainul, A. L. H., Ali, N. A. M., and Anwar, R., "Indonesian Printing Industry Profile," in International Virtual Colloquium on Multi-disciplinary Research Impact (2nd Series), Malaysia, 2021.

Agusti, F., Mahfudz, M. S., Risqi, F. T., and Dewi, K. K., "Modifikasi Assessment Tools Readiness Industry 4.0 Pada Perusahaan Manufaktur," J@ti Undip: Jurnal Teknik Industri, vol. 18, no. 1, pp. 72-78, 2023.

Jamwal, A., Agrawal, R., Sharma, M., and Kumar, V., "Review on multi-criteria decision analysis in sustainable manufacturing decision making," International Journal of Sustainable Engineering, vol. 14, no. 3, pp. 202-225, 2021.

Wang, C., Ghadimi, P., Lim, M. K., and Tseng, M. L., "A Literature Review of Sustainable Consumption and Production: A Comparative Analysis in Developed and Developing Economies," Journal of Cleaner Production, vol. 206, no. 1, pp. 741-754, 2019.

Gupta, S., Dangayach, G. S., and Singh, A. K., "Key Determinants of Sustainable Product Design and Manufacturing," in In M. Y. N. Seliger Procedia CIRP, Berlin, 2015.

Bhamra, T., Hernandez, R. J., Rapitsenyane, Y., and Trimingham, R., "Product Service Systems: A Sustainable Design Strategy for SMEs in the Textiles and Leather Sectors," She Ji, pp. 229-248, 2018.

Ziout, A., Azab, A., Altarazi, S., and Elmaraghy, W. H., "Multi-criteria decision support for sustainability assessment of manufacturing system reuse," CIRP Journal of Manufacturing Science and Technology, vol. 6, no. 1, 2013.

Purwaningsih, R., Susanto, N., and Yudha, M. C., "Penilaian Keberlanjutan UKM Batik Kota Semarang dengan Metode Product Service System (PSS)," Jurnal Teknik Industri, vol. 18, no. 1, 2016.

Batalhao, A. C. D. S., Teixeira, D., and Godoi, E. L. D., "The Barometer of Sustainability as a Monitoring Tool of the Sustainable Development Process in Ribeirão Preto, Brazil," Journal of Environmental Science and Engineering A, vol. 6, no. 3, pp. 120-126, 2017.

Bonnet, J., Coll-Martinez, E., and Renou-maissant, P., "Evaluating sustainable development by composite index: Evidence from french departments," Sustainability (Switzerland), vol. 13, no. 2, pp. 1-23, 2021.

Jamwal, A., Agrawal, R., Sharma, M., and Kumar, V., "Review on multi-criteria decision analysis in sustainable manufacturing decision making," International Journal of Sustainable Engineering, vol. 14, no. 3, pp. 202-225, 2021.

Batalhao, A. C. D. S., Teixeira, D., and Godoi, E. L. D., "The Barometer of Sustainability as a Monitoring Tool of the Sustainable Development Process in Ribeirão Preto, Brazil," Journal of Environmental Science and Engineering, vol. 6, no. 3, pp. 120-126, 2017.

Bonnet, J., Coll-Martinez, E., and Renou-Maissant, P., "Evaluating sustainable development by composite index: Evidence from french departments," Sustainability, vol. 13, no. 2, pp. 1-23, 2021.

Mapar, M., Jafari, M. J., Mansouri, N., Arjmandi, R., Azizinezhad, R., and Ramos, T. B., "A composite index for sustainability assessment of health, safety and environmental performance in municipalities of megacities," Sustainable Cities and Society, vol. 60, 2020.

Dang, D., Lyu, X., Li, X., Liu, S., Dou, H., Wang, M. Li, K., and Cao, W., "Changing of the coordination of socioeconomic development and the environment as sustainable development progresses," Geography and Sustainability, pp. 1-30, 2024.

Solikah, A. A. B. , "Systematic Literature Review : Kajian Potensi," JEBT: Jurnal Energi Baru & Terbarukan, vol. 5, no. 1, pp. 27-43, 2024.

Ali, M., and Windarta, J., "Pemanfaatan Energi Matahari Sebagai Energi Bersih yang Ramah Lingkungan," JEBT: Jurnal Energi Baru & Terbarukan, vol. 1, no. 3, pp. 68-77, 2024.

Sedijani, P., Erniati, M. N., and Hermana, S. Y., "Penanaman Seribu Pohon Sebagai Upaya Mencegah Banjir dan Tanah Longsor di Desa Eyat Mayang, Lembar, Nusa Tenggara Barat," Jurnal Pengabdian Magister Pendidikan IPA, vol. 5, no. 2, pp. 335-340, 2022.

Fajarianingtyas, D., Puniman, A., and Safitri, H. R. F. A., "PENANAMAN POHON SEBAGAI UPAYA MENUMBUHKAN ECOLITERACY BERBASIS EDUCATION FOR SUSTAINABLE DEVELOPMENT GOALS," JMM (Jurnal Masyarakat Mandiri), vol. 8, no. 2, pp. 2267-2276, 2024.

Feronika, E. S., Silva, K. R., Raharjo, S. T., and Resnawaty, R., "TANGGUNG JAWAB SOSIAL PERUSAHAAN BIDANG LINGKUNGAN," Prosiding Penelitian dan Pengabdian kepada Masyarakat, vol. 7, no. 1, pp. 1-11, 2020.

Nurwahyudi, M. R. M., "PENGARUH GENDER WANITA DALAM DEWAN DIREKSI TERHADAP KINERJA KEUANGAN STUDI PADA PERUSAHAAN YANG MASUK INDEX KOMPAS 100 TAHUN 2014-2015," JURNAL STIE SEMARANG (Edisi Elektronik), vol. 12, no. 2, pp. 106-127, 2020.

Fitriasyach, K. P., Putri, S. I., and Afififatusholihah, L., "Peran Supplier Relationship Management (SRM) Pada Pemasok Di PT. Krakatau Pipe Industries," Jurnal manajemen dan Bisnis, vol. 4, no. 2, pp. 141-149, 2024.

Indarwati, T., "Teknik Pengambilan Keputusan pada Pemilihan Supplier : A Literature Review," Jurnal Penelitian dan Aplikasi Sistem & Teknik Industri (PASTI), vol. 15, no. 3, pp. 268-281, 2020.

Damayanti, D. P. O., and Simangunsong, F., " Doi: 10.53363/bureau.v2i3.53 624 PERLINDUNGAN HUKUM DALAM KASUS KEKERASAN DAN PERBUDAKAN MANUSIA," Indonesia Journal of Law and Social-Political Governance, vol. 2, no. 3, pp. 624-633, 2022.

Syifa, S., and Nurhasanah, N., "Penilaian Kinerja Pemasok Menggunakan Metode Vendor Performance Indicator dan Fuzzy Analytical Hierarchy Process (FAHP)," Jurnal AL-AZHAR INDONESIA SERI SAINS DAN TEKNOLOGI, vol. 8, no. 3, pp. 186-198, 2023.

Waruwu, M., "Metode Penelitian dan Pengembangan (R&D): Konsep, Jenis, Tahapan dan Kelebihan," Jurnal Ilmiah Profesi, vol. 9, no. 2, pp. 1220-1230, 2024.




Copyright (c) 2025 Febrina Agusti

Creative Commons License This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.