DOI: https://doi.org/10.14710/baf.%25v.%25i.%25Y.%25p

Pembuatan Perangkat Elektroplating untuk Praktik di SMK Muhammadiyah 1 Moyudan Sleman

*Arianto Leman Soemowidagdo orcid scopus  -  Department of Mechanical Engineering Education, Universitas Negeri Yogyakarta, Kampus Karangmalang, Yogyakarta, 55281, Indonesia
*Arianto Leman Soemowidagdo orcid scopus  -  Department of Mechanical Engineering Education, Kampus Karangmalang, Yogyakarta, 55281, Indonesia
Open Access Copyright 2026 Jurnal Pengabdian Vokasi

Citation Format:
Abstract
[The Electroplating Devices Manufakturing for Practice at SMK Muhammadiyah 1 Moyudan Sleman] SMK Muhammadiyah 1 Moyudan which located on Jl. Klangon-Tempel Km 4.5 Gedongan, Sumberagung, Moyudan, Sleman, DIY have Motorcycle Engineering and Business and Light Vehicle Engineering programs. In both programs, electroplating practice has not been electroplating practice has not been held since the absence of devices. The Mechanical Engineering Education Department service team of Yogyakarta State University which have expertise in developing equipment for practice, took the initiative to make a device for electroplating practice. The Four-D method was applied to create an electroplating practice device. The PAR method was applied to train teachers and education staff to perform the electroplating process. The electroplating devices equipped with 6 vessels so that able to accommodate the processes of hot degreasing, pickling, nickel strike and shiny nickel plating, and rinsing. The device is also equipped with a digital rectifier, temperature-controlled heater, aerator, and nickel anode in a titanium basket. Teachers and education staff have understood the theory of electroplating and are able to perform nickel plating with electroplating methods. However, learning modules are needed to improve the usefulness of electroplating practice devices.
Fulltext View|Download
Keywords: Manufacturing; Device; Electroplating; Practice; SMK

Article Metrics:

Article Info
Section: Articles
Language : ID
Recent articles
MEKANISME DESAIN MATRAS UNTUK PRODUK UKIR TEMBAGA DAN KUNINGAN Pembuatan Perangkat Elektroplating untuk Praktik di SMK Muhammadiyah 1 Moyudan Sleman Empowering the Fatayat NU’s Group in Karimunjawa Village Through IoT-Based Hydroponic More recent articles
  1. D. A. Puryono, “Pelatihan Pembuatan Video Pembelajaran untuk Guru SD Kristen Terang Bagi Bangsa Pati Menggunakan Kinemaster,” Jurnal Pengabdian Vokasi, vol. 1, no. 4, pp. 242–247, Nov. 2020
  2. F. Y. Hermanto, Sutirman, B. Hidayati, and M. Sholikah, “The Need of Practical Teaching In Vocational High School of Automation and Office Management Program,” Jurnal Pendidikan Vokasi, vol. 9, no. 3, pp. 238–248, Nov. 2019
  3. M. K. Anam, Samsudi, and E. Supraptono, “The Effect of Using a PLTS Trainer Kit with IoT Control on the Competence to Build Smart Buildings,” Journal of Vocational Career Education, vol. 8, no. 1, pp. 29–38, 2023
  4. Sutirman, Muhyadi, and H. D. Surjono, “Problems in Learning of Electronic Filing at Vocational School in Yogyakarta Special Region, Indonesia,” Journal of Education and Practice, vol. 8, no. 5, pp. 94–99, 2017
  5. B. Astuti et al., “Upaya Peningkatan Ketrampilan Guru MGMP Fisika SMK Kabupaten Klaten dalam Penyusunan Media Pembelajaran Interaktif Melalui Pelatihan dan Pendampingan,” Abdimasku, vol. 7, no. 3, pp. 1281–1290, Sep. 2024
  6. W. Apriliyanto et al., “Kinerja Alat Elektroplating untuk Praktik di SMK,” Jurnal Dinamika Vokasional Teknik Mesin, vol. 6, no. 2, pp. 105–111, Oct. 2021
  7. H. A. Wahab, M. Y. Noordin, S. Izman, and D. Kurniawan, “Quantitative Analysis of Electroplated Nickel Coating on Hard Metal,” The Scientific World Journal, vol. 2013, no. 631936, pp. 1–6, 2013
  8. R. Candra, U. Budiarto, and H. Yudo, “Pengaruh Temperatur dan Tegangan Listrik pada proses Elektroplating Lapisan Seng Terhadap Laju Korosi pada Baja Karbon Rendah A36 ,” Jurnal Teknik Perkapalan, vol. 12, no. 2, pp. 1–7, Apr. 2024
  9. T. A. Rizki, Fakhriza, Saifuddin, and A. Fathier, “Pengaruh Waktu dan Temperatur Proses Elektroplating Terhadap Ketebalan dan Kekerasan Permukaan Baja ASTM A36,” Jurnal Mesin Sains Terapan, vol. 7, no. 2, pp. 103–106, Sep. 2023
  10. E. Triyono, S. S. Rahayu, V. S. A. Budiarti, B. Sumiyarso, and Amrul, “Penerapan Teknologi Elektroplating Pada Industri Kecil Knalpot di Purbalingga,” Jurnal DIANMAS, vol. 8, no. 2, pp. 101–106, Sep. 2018
  11. D. Landolt, “Electrodeposition Science and Technology in Last Quarter of Twentieth Century,” Journal of Electrochemical society, vol. 149, no. 3, pp. 9–20, 2002
  12. M. Saleim, A. M. Ahmed, and A. F. El Adl, “Electroplating in Steel in Presence of Isopropanol-Water Mixture,” Int J Electrochem Sci, vol. 9, no. 2, pp. 2016–2028, Feb. 2014
  13. V. Kayadoe and Y. T. Filindity, “Kondisi Optimum Elektroplating Baja Karbon Rendah Menggunakan Logam Seng (Zn),” Science Map Journal, vol. 2, no. 1, pp. 44–54, Jun. 2020
  14. N. Mulyaningsih, “Penerapan Teknologi Lapis Listrik Bagi Warga Desa Balesari,” Civitas Ministerium, vol. 1, no. 1, pp. 45–55, 2017
  15. Muti’ah, Sukib, and J. Siahaan, “Demonstrasi Cara Penyepuhan Logam untuk Meningkatkan Motivasi Belajar Kimia Siswa SMAN 1 Batulayar, Lombok Barat,” Jurnal Pendidikan dan Pengabdian Masyarakat, vol. 1, no. 1, pp. 104–110, Feb. 2018
  16. M. K. Usman and A. N. Akhmadi, “Upaya Peningkatan Pengetahuan Pelapisan Logam dI SMK ASTRINDO,” Jurnal PkM: Pengabdian kepada Masyarakat , vol. 4, no. 6, pp. 671–676, Nov. 2021
  17. I. M. Sudana, I. A. A. Arsani, and I. G. N. S. Waisnawa, “Alat Simulasi Pelapisan Logam dengan Metode Elektroplating,” Jurnal Logic, vol. 14, no. 3, pp. 190–198, Nov. 2014
  18. Langgeng, H. S. Pratama, and K. L. Sodiwiryo, “Alat Elektroplating Berbasis Pengatur Waktu Untuk Pelapisan Chrome di Laboratorium Pelapisan Logam,” Otopro, vol. 19, no. 2, pp. 65–70, May 2024
  19. J. R. Johan, T. Iriani, and A. Maulana, “Penerapan Model Four-D dalam Pengembangan Media Video Keterampilan Mengajar Kelompok Kecil dan Perorangan,” Jurnal Pendidikan West Science, vol. 1, no. 6, pp. 372–378, Jun. 2023
  20. U. Umayyah, Idris, and M. H. Ubaidillah, “PAR (Participatory Action Research): Pengelolaan Sampah Rumah Tangga di Lingkungan Desa Kunjorowesi,” Jurnal Abdidas, vol. 4, no. 6, pp. 562–573, 2023
  21. N. Mulyaningsih, F. A. R. Majid, K. Suharno, and I. Taufik, “Pengaruh Penambahan Pompa dan Filter Air pada Alat (Elektroplating) terhadap Nilai Kekerasan,” Journal of Mechanical Engineering, vol. 3, no. 2, pp. 20–24, Sep. 2019
  22. B. A. Zulfahmi and A. L. Soemowidagdo, “Implementing A Module On Aluminium Casting Practices At A State Vocational High School SMKN 2 Wonosari,” in Journal of Physics: Conference Series 1273, IOP Publishing, 2019, pp. 1–8

Last update:

No citation recorded.

Last update:

No citation recorded.