DOI: https://doi.org/10.14710/jpv.2022.15336

MODIFIKASI TACK WELDING PADA FOUR FLUTE SPIRAL HSS END MILL ROUTER CUTTING PROSES PEMOTONGAN HIGH DENSITY POLYETHYLENE (HDPE) SHEET SEBAGAI MATERIAL ALTERNATIF KONSTRUKSI KAPAL IKAN

*Samuel Febriary Khristyson  -  Diponegoro University, Indonesia
Open Access Copyright 2022 Jurnal Pengabdian Vokasi

Citation Format:
Abstract
HDPE menjadi salah satu alternatif untuk menjadi bahan material pengganti kayu yang dapat diaplikasikan kepada kapal ikan . Teknologi pengguanan CNC Router cutting sebagai salah satu teknik pemotongan part cukup baik dikembangan di dunia industri polimer. Tujuan penelitian ini untuk mengetahui pengaruh pemberian tack weld terhadap four flute spiral HSS end mill router cutting dalam proses pemotongan high density polyethylene (HDPE) sheet sebagai material alternatif konstruksi kapal ikan. Hasil penelitian ini pada kondisi putaran yang sama dan pemotongan ketebalan HDPE yang sama, menunjukan pada end mill tanpa modifikasi diameter 12 mm max. temperatur 42,10 0C   dengan 13,23 min/meter, dan pada modifikasi max. temperatur 43,50 0C   dengan 13,22 min/meter. Pada end mill tanpa modifikasi diameter 14 mm max. temperatur 44,12 0C dengan 14,34 min/meter, dan pada modifikasi max. temperatur 45,15 0C dengan 14,23 min/meter.
Fulltext View|Download
Keywords: Fishing boat construction ; HDPE; CNC Router ; End Mill ; Tack Weld
Funding: Universitas Diponegoro

Article Metrics:

Article Info
Section: Articles
Language : ID
Recent articles
PENGEMBANGAN UMKM MEMBATIK BERBASIS TEKNOLOGI TEPAT GUNA DI DESA CIBELOK, KABUPATEN PEMALANG FASILITAS PENUNJANG PENERANGAN JALAN DI WILAYAH RT 04 RW 02 KELURAHAN PEDALANGAN KECAMATAN BANYUMANIK KOTA SEMARANG: SEBUAH USULAN DESAIN TIANG LAMPU THE IMPLEMENTATION OF REVITALIZATION POLICY IN VOCATIONAL HIGHER EDUCATION PROGRAM/IMPLEMENTASI KEBIJAKAN REVITALISASI PENDIDIKAN TINGGI VOKASI PROGRAM DIPLOMA III More recent articles
  1. Basso, I., Voigt, R., Rodrigues, A. R., Marin, F., de Souza, A. F., & de Lacalle, L. N. L. (2022). Influences of the workpiece material and the tool-surface engagement (TSE) on surface finishing when ball-end milling. Journal of Manufacturing Processes, 75, 219–231. https://doi.org/https://doi.org/10.1016/j.jmapro.2021.12.059
  2. Cui, Z. P., Zhang, H. J., Zong, W. J., Li, G., & Du, K. (2022). Origin of the lateral return error in a five-axis ultraprecision machine tool and its influence on ball-end milling surface roughness. International Journal of Machine Tools and Manufacture, 178, 103907. https://doi.org/https://doi.org/10.1016/j.ijmachtools.2022.103907
  3. Davis, R., Singh, A., Sabino, R. M., Pereira, R. B. D., Popat, K., Soares, P., & Jackson, M. J. (2021). Performance Investigation of Cryo-treated End Mill on the Mechanical and in vitro behavior of Hybrid-lubri-coolant-milled Ti-6Al-4V alloy. Journal of Manufacturing Processes, 71, 472–488. https://doi.org/https://doi.org/10.1016/j.jmapro.2021.09.052
  4. Ghanbari, H. R., Shariati, M., Sanati, E., & Masoudi Nejad, R. (2022). Effects of spot welded parameters on fatigue behavior of ferrite-martensite dual-phase steel and hybrid joints. Engineering Failure Analysis, 134, 106079. https://doi.org/https://doi.org/10.1016/j.engfailanal.2022.106079
  5. Khristyson, S. F., Jamari, & Bayuseno, A. P. (2021). Design of Fishing Vessel 5 GT for Traditional Fishing Community Activities. IOP Conference Series: Materials Science and Engineering, 1096(1), 12030. https://doi.org/10.1088/1757-899x/1096/1/012030
  6. Liang, Z., Du, Y., Ma, Y., Su, Z., Chen, R., Yuan, H., Zhou, T., & Wang, X. (2022). Development of polycrystalline diamond micro end mill for milling-grinding combined machining of cemented carbide. Journal of Manufacturing Processes, 79, 844–853. https://doi.org/https://doi.org/10.1016/j.jmapro.2022.05.020
  7. Lizzul, L., Sorgato, M., Bertolini, R., Ghiotti, A., & Bruschi, S. (2021). Ball end milling machinability of additively and conventionally manufactured Ti6Al4V tilted surfaces. Journal of Manufacturing Processes, 72, 350–360. https://doi.org/https://doi.org/10.1016/j.jmapro.2021.10.037
  8. Sidhom, A. A. E., Naga, S. A. R., & Kamal, A. M. (2022). Friction stir spot welding of similar and dissimilar high density polyethylene and polypropylene sheets. Advances in Industrial and Manufacturing Engineering, 4, 100076. https://doi.org/https://doi.org/10.1016/j.aime.2022.100076
  9. Sulaiman, S., Said, S. D., Khristyson, S. F., & Cahyo, I. D. (2020). Desain Konstruksi Bar Keel Pada Kapal Kayu Nelayan. Jurnal Pengabdian Vokasi, 1(3), 153–158. https://ejournal2.undip.ac.id/index.php/jpv/article/view/5382
  10. Sulaiman Sulaiman, S. F. K. (2022). Analisa Sambungan Groove pada Pengelasan HDPE Sebagai Material Alternatif Konstruksi Kapal Kayu Nelayan. Inovtek Polbeng, 12(1)
  11. Sun, H., Zou, B., Chen, P., Huang, C., Guo, G., Liu, J., Li, L., & Shi, Z. (2022). Effect of MQL condition on cutting performance of high-speed machining of GH4099 with ceramic end mills. Tribology International, 167, 107401. https://doi.org/https://doi.org/10.1016/j.triboint.2021.107401
  12. Tian, J., Tao, W., & Yang, S. (2022). Investigation on microhardness and fatigue life in spot welding of quenching and partitioning 1180 steel. Journal of Materials Research and Technology, 19, 3145–3159. https://doi.org/https://doi.org/10.1016/j.jmrt.2022.06.083
  13. Wang, F., Li, Y., Zhang, B., Deng, J., Lin, Y., Yang, L., & Fu, R. (2022). Theoretical model of instantaneous milling force for CFRP milling with a ball-end milling cutter: Considering spatial dimension and temporal dimension discontinuity effects. Journal of Manufacturing Processes, 75, 346–362. https://doi.org/https://doi.org/10.1016/j.jmapro.2022.01.021
  14. Zhang, L., Dong, P., Wang, Y., & Mei, J. (2022). A Coarse-Mesh hybrid structural stress method for fatigue evaluation of Spot-Welded structures. International Journal of Fatigue, 164, 107109. https://doi.org/https://doi.org/10.1016/j.ijfatigue.2022.107109
  15. Zhang, Q., Lan, L., Zheng, Z., Liu, P., Wu, H., Guo, S., Lin, C., & He, G. (2022). Constructing highly oriented and condensed shish-kebab crystalline structure of HDPE/UHMWPE blends via intense stretching process：Achieving high mechanical properties and in-plane thermal conductivity. Polymer, 241, 124532. https://doi.org/https://doi.org/10.1016/j.polymer.2022.124532

Last update:

No citation recorded.

Last update:

No citation recorded.