skip to main content

Inovasi Alat Penunjang Pembuatan Sediaan Histopatologi

Departemen Keilmuan Patologi Anatomi, Universitas Brawijaya, Malang, Indonesia

Open Access Copyright 2025 Jurnal Pengelolaan Laboratorium Pendidikan

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Citation Format:
Abstract
The availability of supporting tools for histopathology slide preparation remains limited, characterized by high usage rates, inefficient material consumption, cleaning difficulties, frequent damage, high costs, small capacity, and low precision. This study aims to develop prototype innovations of supporting tools for histopathology preparation to address these issues. Three types of innovative tools were developed: a paraffin block mold, a slide rack for an automatic staining machine, and a slide box made of silicone-resin. The development process consisted of three main stages: the first mold creation (outer part), the second mold creation (inner part), and the casting of the innovative tools. The results demonstrate that the developed tools offer advantages in terms of effectiveness, efficiency, material savings, cost reduction, durability, and ease of production. Based on functionality testing, all tools were deemed feasible for use. This innovation is expected to serve as an alternative solution to the limited availability of supporting tools in the Anatomical Pathology Laboratory of the Faculty of Medicine, while also introducing a new approach through the use of different materials.

Note: This article has supplementary file(s).

Fulltext View|Download |  research tool innovation
Inovasi Alat Penunjang Pembuatan Sediaan Histopatologi
Subject innovation
Type research tool innovation
  Download (582KB)    Indexing metadata
Keywords: Innovation, Supporting Tools, Histopathological Preparations
Funding: Direktorat Sumber Daya, Direktorat Jenderal Pendidikan Tinggi, Riset, dan Teknologi, Kementerian Pendidikan, Kebudayaan, Riset, dan Teknologi

Article Metrics:

  1. Aisyah, P. N., & Syakur, A. (2019). Analisis Penambahan Silicone Rubber pada Bahan Resin Epoksi terhadap Parameter Listrik , Mekanik dan Fisik untuk Bahan Isolator. Transient, 8(3), 252–261
  2. Amalo, F. A., Winarso, A., Klinik, L., Cendana, U. N., Anatomi, L., Cendana, U. N., Hewan, K., & Cendana, U. N. (2023). Gambaran Patologi Anatomi dan Histopatologi Organ Visceral Kambing Kacang. Jurnal Veteriner Nusantara, VI(24)
  3. Batoebara, M. U., Komunikasi, I., Isip, F., & Dharmawangsa, U. (2021). Inovasi dan Kolaborasi dalam Era Komunikasi Digital. Jurnal Prosiding Ilmu Sosial Dan Ilmu Politik Universitas Dharmawangsa, 29–38
  4. Damaru, R., Novaringga, A., & Br, S. (2021). Resin Composite Synthesis Reinforced with Banana Tree Fiber with Carboxylic Silica (SiO2-COOH) Addition as a Nanofiller. Indonesian Journal of Chemical Science, 10(1)
  5. Effect, T., Fraction, F. V., Strength, T., Sugar, U., Reinforced, C. F.-, Matrix, P., & Bqtn, S. (2011). Pengaruh fraksi volume serat terhadap sifat-sifat tarik komposit diperkuat unidirectional serat tebu dengan matrik poliester. 14(2), 133–138
  6. Faulana, A. F., Eka, D., Empra, P., Rahmadian, D., Shalihah, F., Nuriliani, A., Retnoaji, B., Rohma, Z., & Septriani, N. I. (2024). Review : Aplikasi Histopatologi Untuk Praktik Forensik Review : Applications Of Histopathology For Forensic Practice. Borneo Journal of Medical Laboratory Technology, 6 nomer 2, 529–539
  7. No, J. I., Lor, P., Tengah, K. S., & Semarang, K. (2021). Mikroskopis Preparat Mus musculus Jaringan Ginjal yang Dideparafinisasi dengan Minyak Zaitun pada Pengecatan Hematoxylin Eosin ( HE ). Jurnal Laboratorium Medis, 03(01), 61–66
  8. Novita, I., & Yuliana, L. (2023). Perbedaan teknik dan larutan mounting preparat basah dalam pembuatan preparat awetan di laboratorium pendidikan. 1, 1–5
  9. Puri, J., Raya, I., Rw, R. T., & Sel, K. (2021). Profil Mikroskopis Jaringan Hepar Mencit ( Mus musculus ) yang Difiksasi dengan Neutral Buffered Formalin ( NBF 10 %) dan Larutan Helly. Jurnal Laboratorium Medis, 03(02), 90–95
  10. Sariski, M., Ellianto, D., Wahyudi, P. L., Studi, P., Pengolahan, T., Yogyakarta, P. A. T. K., Bantul, K., & Yogyakarta, D. I. (2023). Perancangan Mold Base dengan Sistem Two Plate Mold untuk Produk Spesimen Uji Tarik. Jurnal Teknik Mesin Universitas Muhammadiyah Tangerang, 7(1), 7–14
  11. Setianto, M. H., Purnomo, H., & Chalid, M. (2023). Characterization of Glass Fiber / Epoxy with Various Silicone Resin Addition Composite ’ s Compressive and Flexural Strength. Jurnal Sains Materi Indonesia, 25(1), 1–7. https://doi.org/10.55981/jsmi.277
  12. Sucahyono, A. E. (2021). Pemanfaatan Resin Sebagai Media Tempel untuk Kerajinan Cangkang Kerang Darah. Prosiding Seminar Nasional Industri Kerajinan Dan Batik Membangun Industri Kerajinan Dan Batik Yang Tangguh Di Masa Pandemi
  13. Sujana, W., & Widi, I. K. A. (2013). Pemanfaatan Silicon Rubber Untuk Meningkatkan Ketangguhan Produk Otomotif Buatan Lokal. Jurnal Energi Dan Manufaktur, 6(1), 37–42
  14. Wahyuni, D., Wibowo, A. A., Oktaviyanti, I. K., Budiwinata, W., Rosida, L., Studi, P., Program, K., Mangkurat, U. L., Digestif, D. B., Bedah, D. I., Mangkurat, U. L., Biomedik, D., & Mangkurat, U. L. (2022). Hubungan Derajat Diferensiasi Dengan Jumlah Sel Radang Limfosit Pada Histopatologi Kanker Kolorektal. Homeostasis, 6 nomer 3
  15. Wira, D., Wandari, T., Restu, I. W., Suryaningtyas, E. W., & Batur, D. (2018). Studi Histopatologi Insang Ikan Nila (Oreochromis Niloticus, Linn.) Ditinjau Dari Kadar Ammonia (NH3) di Danau Batur, Bali. Jurnal Metamorforsa, 7(81), 1–7

Last update:

No citation recorded.

Last update:

No citation recorded.