Pengaruh Penambahan Sodium Lauryl Sulfat terhadap Karakteristik Sabun Padat pada Mata Kuliah Praktikum Analitik Proses

Joko Suryadi; Eko Andrijanto

doi:10.14710/jplp.6.1.24-33

DOI: https://doi.org/10.14710/jplp.6.1.24-33

Pengaruh Penambahan Sodium Lauryl Sulfat terhadap Karakteristik Sabun Padat pada Mata Kuliah Praktikum Analitik Proses

Joko Suryadi

, Eko Andrijanto

Jurusan Teknik Kimia Politeknik Negeri Bandung, Jl. Gegerkalong Hilir, Ciwaruga, Kec. Parongpong, Bandung Barat 40559, Indonesia

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

BibTex Citation Data :

@article{JPLP18730,
    author = {Joko Suryadi and Eko Andrijanto},
    title = {Pengaruh Penambahan Sodium Lauryl Sulfat terhadap Karakteristik Sabun Padat pada Mata Kuliah Praktikum Analitik Proses},
    journal = {Jurnal Pengelolaan Laboratorium Pendidikan},
  volume = {6},
    number = {1},
    year = {2024},
    keywords = {sabun padat ; praktikum analisis proses ; metode hot process ; sodium lauryl sulfat},
    abstract = {        Solid soap as a result from process analysis practicum can be produced using with hot process method using raw material of palm oil and a strong base in the form of NaOH. The aim of this research is that apart from fostering student inquiry regarding the soap making process, they are also able to analyze the parameters of solid soap over a certain period based on variations in the amount of added surfactant. The methods used in practicum activities are dividing practicum groups, making solid soap, and collecting practicum reports. In the activity of making solid soap, the concentration of sodium lauryl sulfate (SLS) was varied for each group, 0, 1, 2 and 3% w/w respectively. The parameters measured in this research were the pH value, water content, ability to form foam, free fatty acid content and ethanol insoluble material in solid soap. The pH characterization of the results of the saponification process shows that soap at all variations in SLS concentration is predominantly alkaline. The characterization carried out showed that the levels of free fatty acids and ethanol insoluble substances met SNI 3532:2016 standards. Water content parameters do not meet these standards because the measurements were carried out during practical activities and without the process of holding the soap product. From the results of observing these parameters, in general it can be concluded that the solid soap products resulting from the practical work have the best quality under the condition of adding SLS with a concentration of 1%.              },
   issn = {2654-251X},   pages = {24--33}  doi = {10.14710/jplp.6.1.24-33},
    url = {https://ejournal2.undip.ac.id/index.php/jplp/article/view/18730}
}

Citation Format:

Abstract

Solid soap as a result from process analysis practicum can be produced using with hot process method using raw material of palm oil and a strong base in the form of NaOH. The aim of this research is that apart from fostering student inquiry regarding the soap making process, they are also able to analyze the parameters of solid soap over a certain period based on variations in the amount of added surfactant. The methods used in practicum activities are dividing practicum groups, making solid soap, and collecting practicum reports. In the activity of making solid soap, the concentration of sodium lauryl sulfate (SLS) was varied for each group, 0, 1, 2 and 3% w/w respectively. The parameters measured in this research were the pH value, water content, ability to form foam, free fatty acid content and ethanol insoluble material in solid soap. The pH characterization of the results of the saponification process shows that soap at all variations in SLS concentration is predominantly alkaline. The characterization carried out showed that the levels of free fatty acids and ethanol insoluble substances met SNI 3532:2016 standards. Water content parameters do not meet these standards because the measurements were carried out during practical activities and without the process of holding the soap product. From the results of observing these parameters, in general it can be concluded that the solid soap products resulting from the practical work have the best quality under the condition of adding SLS with a concentration of 1%.

Note: This article has supplementary file(s).

Fulltext View|Download | Copyright Transfer Agreement

Perjanjian Pengalihan Hak Cipta

Subject
Type	Copyright Transfer Agreement
	Download (632KB) Indexing metadata

Keywords: sabun padat ; praktikum analisis proses ; metode hot process ; sodium lauryl sulfat

Article Metrics:

Article Info

Section: Articles

Language : ID

In Vol.6, No.1, Januari 2024

Recent articles

Rancang Bangun Miniatur Kapal Bentuk V Bottom sebagai Simulator Inclining Test Pembuatan Animasi Game Pemasangan NGT sebagai Media Pembelajaran Praktikum KDM Laser Auto Level In Lathe Life Center untuk Meningkatkan Kinerja Mesin Bubut di Laboratorium Teknik Pemesinan More recent articles

Babcock, R.E., E C Clausen, P.I., Michael Popp, C.-P., Brent Schulte, C.-P.W., Assistant, G., 2008. Yield Characteristics of Biodiesel Produced from Chicken Fat-Tall Oil Blended Feedstocks Completion Report Project Number MBTC-2092
Badan Standarisasi Nasional, 2016. SNI 3532:2016, Sabun Mandi Padat. Indonesia
Bhatane, P.B., Harangule, Y., Bavage, N.B., Gali, V., Bavage, S.B., 2020. Investigation of Foaming Capacity of Different Washing Soap 6, 67–71
Bhattachar, S.N., Risley, D.S., Werawatganone, P., Aburub, A., 2011. Weak bases and formation of a less soluble lauryl sulfate salt/complex in sodium lauryl sulfate (SLS) containing media. Int. J. Pharm. 412, 95–98. https://doi.org/10.1016/j.ijpharm.2011.04.018
Bondi, C.A.M., Marks, J.L., Wroblewski, L.B., Raatikainen, H.S., Lenox, S.R., Gebhardt, K.E., 2015. Human and Environmental Toxicity of Sodium Lauryl Sulfate (SLS): Evidence for Safe Use in Household Cleaning Products. Environ. Health Insights 9, 27–32. https://doi.org/10.4137/EHI.S31765
CDH Fine chemical, 2008. Sodium Lauryl Sulphate CAS No 151-21-3 Material Safety Data Sheet SDS / MSDS 1–8
F., F., Sari, L.I., Nofita, R., 2015. Formulasi Sabun Transparan Minyak Ylang-Ylang dan Uji Efektivitas terhadap Bakteri Penyebab Jerawat. J. Sains Farm. Klin. 1, 61. https://doi.org/10.29208/jsfk.2014.1.1.13
Friedman, M., 2016. Chemistry, Formulation, and Performance of Syndet and Combo Bars, 2nd ed, Soap Manufacturing Technology: Second Edition. Elsevier Ltd. https://doi.org/10.1016/B978-1-63067-065-8.50004-9
Hamidah, H., Rabbani, T.A.S., Fauziah, S., Puspita, R.A., Gasalba, reski A., Nirwansyah, 2020. Hots-oriented module: project based learning
International Organization of Standardization, 1981. ISO 673:1981, Soaps - Determination of content of ethanol-insoluble matter. Switzerland
Iriany, Sukeksi, L., Diana, V., Taslim, 2020. Preparation and Characterization of Coconut Oil Based Soap with Kaolin as Filler. J. Phys. Conf. Ser. 1542. https://doi.org/10.1088/1742-6596/1542/1/012046
Klimaszewska, E., Wieczorek, D., Lewicki, S., Stelmasiak, M., Ogorzałek, M., Szymański, Ł., Tomasiuk, R., Markuszewski, L., 2022. Effect of New Surfactants on Biological Properties of Liquid Soaps. Molecules 27. https://doi.org/10.3390/molecules27175425
Lestari, U., Syamsurizal, S., Handayani, W.T., 2020. Formulasi dan Uji Efektivitas Daya Bersih Sabun Padat Kombinasi Arang Aktif Cangkang Sawit dan Sodium Lauril Sulfat. JPSCR J. Pharm. Sci. Clin. Res. 5, 136. https://doi.org/10.20961/jpscr.v5i2.39869
Lukić, M., Pantelić, I., Savić, S.D., 2021. Towards optimal ph of the skin and topical formulations: From the current state of the art to tailored products. Cosmetics 8. https://doi.org/10.3390/cosmetics8030069
Mela, E., Rahayu, A.Y., Wijonarko, G., 2018. Pembuatan Sabun Mandi Alami VCO dengan Metode Cold Process. Universitas Jenderal Soedirman, Purwokerto, pp. 218–226
Ngaosuwan, K., Lotero, E., Suwannakarn, K., Goodwin, J.G., Praserthdam, P., 2009. Hydrolysis of triglycerides using solid acid catalysts. Ind. Eng. Chem. Res. 48, 4757–4767. https://doi.org/10.1021/ie8013988
Nora, A., Szczepanek, A., Koenen, G., 2001. Metallic Soaps, in: Ullmann’s Encyclopedia of Industrial Chemistry. https://doi.org/https://doi.org/10.1002/14356007.a16_361
Pepling, R., 2003. Soap Bubbles. Sci. Technol. 27–29
Prieto Vidal, N., Adeseun Adigun, O., Huong Pham, T., Mumtaz, A., Manful, C., Callahan, G., Stewart, P., Keough, D., Horatio Thomas, R., 2018. The effects of cold saponification on the unsaponified fatty acid composition and sensory perception of commercial natural herbal soaps. Molecules 23, 1–20. https://doi.org/10.3390/molecules23092356
Rambabu, K., Edathil, A.A., Nirmala, G.S., Hasan, S.W., Yousef, A.F., Show, P.L., Banat, F., 2020. Date-fruit syrup waste extract as a natural additive for soap production with enhanced antioxidant and antibacterial activity. Environ. Technol. Innov. 20, 101153. https://doi.org/10.1016/j.eti.2020.101153
Setiawati, I., Ariani, A., 2021. Kajian pH dan Kadar Air dalam SNI Sabun Mandi Padat di JABEDEBOG. Pertem. dan Present. Ilm. Stand. 2020, 293–300. https://doi.org/10.31153/ppis.2020.78
Singer, M.M., Tjeerdema, R.S., 1993. Fate and effects of the surfactant sodium dodecyl sulfate. Rev. Environ. Contam. Toxicol. 133, 95–149. https://doi.org/10.1007/978-1-4613-9529-4_3
Sukeksi, L., Iriany, Grace, M., Diana, V., 2021. Characterization of the Chemical and Physical Properties of Bar Soap Made with Different Concentrations of Bentonite as a Filler. Int. J. Technol. 12, 263–274. https://doi.org/10.14716/ijtech.v12i2.4130
Yuniati, A., Roisnahadi, D.T., Irawan, D., 2022. Pembuatan Sabun Dari Minyak Jelantah Dan Eco Enzime. Buguh J. Pengabdi. Kpd. Masy. 2, 24–30

Last update:

No citation recorded.

Last update:

No citation recorded.

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

The Authors submitting a manuscript do so on the understanding that if accepted for publication, copyright of the article shall be assigned to Jurnal Pengelolaan Laboratorium Pendidikan and Laboratorium Technical Service Unit Integrated Laboratory Diponegoro University as publisher of the journal.

Copyright encompasses exclusive rights to reproduce and deliver the article in all form and media, including reprints, photographs, microfilms and any other similar reproductions, as well as translations. The reproduction of any part of this journal, its storage in databases and its transmission by any form or media, such as electronic, electrostatic and mechanical copies, photocopies, recordings, magnetic media, etc. , will be allowed only with a written permission from Jurnal Pengelolaan Laboratorium Pendidikan and Laboratorium.

Jurnal Pengelolaan Laboratorium Pendidikan was published Technical Service Unit Integrated Laboratory Diponegoro University and the Editors make every effort to ensure that no wrong or misleading data, opinions or statements be published in the journal. In any way, the contents of the articles and advertisements published in Jurnal Pengelolaan Laboratorium Pendidikan are sole and exclusive responsibility of their respective authors and advertisers.