Pengukuran Nilai Selisih Error Tegangan Keluaran  Catu Daya DC dengan Menggunakan Multimeter Digital dan Multimeter Analog pada Praktikum Laboratorium Dasar Elektronika dan Rangkaian Listrik Jurusan Teknik Elektro Universitas Sriwijaya

Rachmat Firdaus Falka; Yahya Bahar

doi:10.14710/jplp.4.2.48-56

DOI: https://doi.org/10.14710/jplp.4.2.48-56

Pengukuran Nilai Selisih Error Tegangan Keluaran Catu Daya DC dengan Menggunakan Multimeter Digital dan Multimeter Analog pada Praktikum Laboratorium Dasar Elektronika dan Rangkaian Listrik Jurusan Teknik Elektro Universitas Sriwijaya

Rachmat Firdaus Falka¹ , Yahya Bahar²

¹Laboratorium Dasar Elektronika dan Rangkaian Listrik Fakultas Teknik Universitas Sriwijaya, Indonesia

²Laboratorium Material Industri Fakultas Teknik Universitas Sriwijaya, Indonesia

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

BibTex Citation Data :

@article{JPLP14631,
    author = {Rachmat Falka and Yahya Bahar},
    title = {Pengukuran Nilai Selisih Error Tegangan Keluaran  Catu Daya DC dengan Menggunakan Multimeter Digital dan Multimeter Analog pada Praktikum Laboratorium Dasar Elektronika dan Rangkaian Listrik Jurusan Teknik Elektro Universitas Sriwijaya},
    journal = {Jurnal Pengelolaan Laboratorium Pendidikan},
  volume = {4},
    number = {2},
    year = {2022},
    keywords = {Power Supply, Power Supply, DC Voltage},
    abstract = {  The power supply as a voltage source with a DC (Direct Current) output voltage or direct current is often used for electronic equipment, both office equipment and household equipment (Imam Saukani, 2020). In using the power supply, the output voltage is selected and high accuracy is required to obtain the output voltage that suits the user's needs. Often times, the power supply used in the practicum does not produce the right output voltage. The purpose of this study is to determine the value of the difference in the output voltage error generated after first determining the voltage value to be used at no-load using a digital multimeter and an analog multimeter as a comparison. After measuring the output voltage of the power supply, the correct voltage value is obtained in each practicum, measurements made at the same time can give definite results of the value of the output voltage of the power supply, the relatively small difference in results ensures that the power supply is in good condition, the output voltage of the power supply is measured using the measuring instrument with repeated measurements 7 (seven) times at each predetermined voltage and obtained a difference of 0.01V – 0.02V. After taking measurements using digital and analog multimeters, it can be concluded that measurements made before the practicum by measuring the output voltage of the power supply can help get the correct voltage value in each practicum, measurements by comparing measuring instruments at the same time can provide definite results of the resulting voltage value by the power supply, the difference in the results obtained is relatively small so as to ensure that the power supply is in good condition, the power supply can be used on loads or electronic equipment that requires a DC voltage source (Genta Subni Ananda Putra, et al, 2020). Practicum can be done well by measuring the output voltage of the power supply. This difference in output voltage results is what the author uses as research material for scientific writing which aims to find solutions to existing errors.    },
   issn = {2654-251X},   pages = {48--56}  doi = {10.14710/jplp.4.2.48-56},
    url = {https://ejournal2.undip.ac.id/index.php/jplp/article/view/14631}
}

Citation Format:

Abstract

The power supply as a voltage source with a DC (Direct Current) output voltage or direct current is often used for electronic equipment, both office equipment and household equipment (Imam Saukani, 2020). In using the power supply, the output voltage is selected and high accuracy is required to obtain the output voltage that suits the user's needs. Often times, the power supply used in the practicum does not produce the right output voltage. The purpose of this study is to determine the value of the difference in the output voltage error generated after first determining the voltage value to be used at no-load using a digital multimeter and an analog multimeter as a comparison. After measuring the output voltage of the power supply, the correct voltage value is obtained in each practicum, measurements made at the same time can give definite results of the value of the output voltage of the power supply, the relatively small difference in results ensures that the power supply is in good condition, the output voltage of the power supply is measured using the measuring instrument with repeated measurements 7 (seven) times at each predetermined voltage and obtained a difference of 0.01V – 0.02V. After taking measurements using digital and analog multimeters, it can be concluded that measurements made before the practicum by measuring the output voltage of the power supply can help get the correct voltage value in each practicum, measurements by comparing measuring instruments at the same time can provide definite results of the resulting voltage value by the power supply, the difference in the results obtained is relatively small so as to ensure that the power supply is in good condition, the power supply can be used on loads or electronic equipment that requires a DC voltage source (Genta Subni Ananda Putra, et al, 2020). Practicum can be done well by measuring the output voltage of the power supply. This difference in output voltage results is what the author uses as research material for scientific writing which aims to find solutions to existing errors.

Fulltext View|Download

Keywords: Power Supply, Power Supply, DC Voltage

Article Metrics:

Article Info

Section: Articles

In Vol. 4, No. 2, Juli 2022

Recent articles

Rancang Bangun Sliding Cutting Jig Guna Mengoptimalkan Fungsi Kerja Mesin Gerinda Tangan Sebagai Alat Potong Plat Lembaran Efektivitas Pelatihan Workshop Laboratorium Terhadap Asisten Laboratorium di Fakultas Pertanian UNS Pengukuran Nilai Selisih Error Tegangan Keluaran Catu Daya DC dengan Menggunakan Multimeter Digital dan Multimeter Analog pada Praktikum Laboratorium Dasar Elektronika dan Rangkaian Listrik Jurusan Teknik Elektro Universitas Sriwijaya More recent articles

Last update:

No citation recorded.

Last update:

No citation recorded.

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

The Authors submitting a manuscript do so on the understanding that if accepted for publication, copyright of the article shall be assigned to Jurnal Pengelolaan Laboratorium Pendidikan and Laboratorium Technical Service Unit Integrated Laboratory Diponegoro University as publisher of the journal.

Copyright encompasses exclusive rights to reproduce and deliver the article in all form and media, including reprints, photographs, microfilms and any other similar reproductions, as well as translations. The reproduction of any part of this journal, its storage in databases and its transmission by any form or media, such as electronic, electrostatic and mechanical copies, photocopies, recordings, magnetic media, etc. , will be allowed only with a written permission from Jurnal Pengelolaan Laboratorium Pendidikan and Laboratorium.

Jurnal Pengelolaan Laboratorium Pendidikan was published Technical Service Unit Integrated Laboratory Diponegoro University and the Editors make every effort to ensure that no wrong or misleading data, opinions or statements be published in the journal. In any way, the contents of the articles and advertisements published in Jurnal Pengelolaan Laboratorium Pendidikan are sole and exclusive responsibility of their respective authors and advertisers.