Pemanfaatan Batubara Kalori Rendah pada IGCC (Integrated Gasification Combined Cycle)

Muhammad Rizaldi Zaman; Sri Widodo Agung Suedy

doi:10.14710/jebt.2020.11156

DOI: https://doi.org/10.14710/jebt.2020.11156

Pemanfaatan Batubara Kalori Rendah pada IGCC (Integrated Gasification Combined Cycle)

Muhammad Rizaldi Zaman¹ , Sri Widodo Agung Suedy²

¹Magister Energi, Sekolah Pascasarjana, Universitas Diponegoro, Indonesia

²Departemen Biologi, Fakultas Sains dan Matematika, Universitas Diponegoro, Indonesia

Citation Format:

Abstract

Kekhawatiran akan emisi gas rumah kaca dan krisis energi yang semakin dirasakan negara-negara didunia khususnya di Indonesia menyebabkan perlu dilakukan pengembangan energi alternatif yang bersih dan ramah lingkungan. Teknologi Integrated Gasification Combined Cycle dapat menjadi alternatif terbaik untuk mengatasi permasalaan tersebut. Penelitian ini dilakukan dengan tujuan untuk memberikan gambaran dan keuntungan dari proses IGCC berdasarkan penilitian-penelitian yang sudah ada sehingga dapat dilakukan pengembangan pemanfaatan IGCC menggunakan batubara lignit di Indonesia. Penelitian ini dilakukan dengan studi literatur, pengumpulan data dilakukan dari penelitian-penelitian yang sudah ada untuk mengetahui dampak dan metode yang digunakan untuk mengeringkan batubara rendah yang memiliki moisture tinggi. Analisis dalam penelitian dilakukan menggunakan perbandingan dari setiap literatur, sehingga diperoleh proses dan teknologi yang sesuai untuk pemanfaatan IGCC. Hasil penelitian menunjukkan pemanfaatan teknologi IGCC menggunakan batubara lignit sangat menjanjikan karena walaupun lignit memiliki keterbatasan dalam efisiensi termal karena moisture bahan bakar yang sangat tinggi namun hal ini bisa diminimalisir menggunakan proses drying. Jumlah batubara lignit yang melimpah di Indonesia dapat memudahkan pengembangan IGCC dan emisi yang dihasilkan lebih rendah daripada pembangkit fosil lainnya.

Fulltext View|Download

Keywords: IGCC; lignit; emisi; batubara; pengeringan

Article Metrics:

Article Info

Section: Articles

Language : ID

In Vol 1, No 1 (2020): Maret 2020

Recent articles

Konversi Limbah Plastik Menjadi Bahan Bakar Analisis Komparasi Perhitungan Teori dan Aktual Terhadap Daya Aktif dan Daya Reaktif Steam Turbine Generator 2.0 Pada PT Indonesia Power Semarang Kajian Incinerator Sebagai Salah Satu Metode Gasifikasi Dalam Upaya Untuk Mengurangi Limbah Sampah Perkotaan More recent articles

Atsonios, K., Violidakis, I., Agraniotis, M., Grammelis, P., Nikolopoulos, N., & Kakaras, E. (2015). Thermodynamic analysis and comparison of retrofitting pre-drying concepts at existing lignite power plants. Applied Thermal Engineering, 74, 165–173. https://doi.org/10.1016/j.applthermaleng.2013.11.007
Badan Pengkajian dan Penerapan Teknologi. (2019). Indonesia Energy Outlook 2019: The Impact of Increased Utilization of New and Renewable Energy on the National Economy. Pusat Pengkajian Industri Proses dan Energi (PPIPE)
BP. (2020). Statistical Review of World Energy (70th ed.)
Gräbner, M., Morstein, O. von, Rappold, D., Günster, W., Beysel, G., & Meyer, B. (2010). Constructability study on a German reference IGCC power plant with and without CO2-capture for hard coal and lignite. Energy Conversion and Management, 51(11), 2179–2187. https://doi.org/10.1016/j.enconman.2010.03.011
Harkin, T., Hoadley, A., & Hooper, B. (2011). Optimisation of pre-combustion capture for IGCC with a focus on the water balance. Energy Procedia, 4, 1176–1183
Hashimoto, T., Sakamoto, K., Yamaguchi, Y., Oura, K., Arima, K., & Suzuki, T. (2011). Overview of Integrated Coal Gasification Combined-cycle Technology Using Low-rank Coal. Mitsubishi Heavy Insurtries Technical Review, 48(3), 19–23
Jaszczur, M., Dudek, M., Rosen, M. A., & Kolenda, Z. (2020). An analysis of integration of a power plant with a lignite superheated steam drying unit. Journal of Cleaner Production, 243, 118635. https://doi.org/10.1016/j.jclepro.2019.118635
Oh, H. T., Lee, W. S., Ju, Y., & Lee, C. H. (2019). Performance evaluation and carbon assessment of IGCC power plant with coal quality. Energy, 188, 116063. https://doi.org/10.1016/j.energy.2019.116063
Saw, W. L., & Pang, S. (2013). Co-gasification of blended lignite and wood pellets in a 100 kW dual fluidised bed steam gasifier: The influence of lignite ratio on producer gas composition and tar content. Fuel, 112, 117–124. https://doi.org/10.1016/j.fuel.2013.05.019
Tanno, K., & Makino, H. (2018). Development tendency and prospect of high performance coal utilization power generation system for low carbon society. KONA Powder and Particle Journal, 2018(35), 139–149. https://doi.org/10.14356/kona.2018021
Tsakomakas, N. G., Pilavachi, P. A., & Polyzakis, A. L. (2012). An economic comparison assessment of lignite and biomass IGCC power plants. Applied Thermal Engineering, 38, 26–30
Wahid, A., Mustafida, D. R., & Husnil, Y. A. (2020). Exergy analysis of coal-fired power plants in ultra supercritical technology versus integrated gasification combined cycle. Evergreen, 7(1), 32–42. https://doi.org/10.5109/2740939
Xia, C., Ye, B., Jiang, J., & Shu, Y. (2020). Prospect of near-zero-emission IGCC power plants to decarbonize coal-fired power generation in China: Implications from the GreenGen project. Journal of Cleaner Production, 271, 122615. https://doi.org/10.1016/j.jclepro.2020.122615
Xu, J., Wang, T., Gao, M., Peng, T., Zhang, S., & Tan, J. (2020). Energy and exergy co-optimization of IGCC with lower emissions based on fuzzy supervisory predictive control. Energy Reports, 6, 272–285. https://doi.org/10.1016/j.egyr.2020.01.003
Zhu, Q. (2014). Coal Sampling and Analysis Standards. IEA Clean Coal Centre Park House. https://www.usea.org/sites/default/files/042014_Coal sampling and analysis standards_ccc235.pdf

Last update:

No citation recorded.

Last update:

No citation recorded.

The authors submitting a manuscript do so on the understanding that if accepted for publication, the article's copyright shall be assigned to Jurnal Energi Baru dan Terbarukan (JEBT) and Master Program of Energy, Universitas Diponegoro. Copyright encompasses rights to reproduce and deliver the article in all forms and media, including reprints, photographs, microfilms, and other similar reproductions and translations.

As an article writer, the authors have the right to use their articles for various purposes, including by institutions that employ authors or institutions that provide funding for research. Author rights are granted without special permission.

Authors who publish a paper at JEBT have the broad right to use their work for teaching and scientific purposes without the need to ask permission, including used for (i) teaching in the author's class or institution, (ii) presentation at meetings or conferences and distributing copies to participants ; (iii) training conducted by the author or author's institution; (iv) distribution to colleagues for research use; (v) use in the compilation of subsequent authors' works; (vi) inclusion in a thesis or dissertation; (vi) reuse of part of the article in another work (with citation); (vii) preparation of derivative works (with citation); (viii) voluntary posting on open websites operated by authors or author institutions for scientific purposes (following the CC BY-SA License).

Reproduce any part of this journal, its storage in the database, or its transmission by all forms of media is permitted and does not need written permission from the JEBT journal. However, it should be cited as an honor in academic manners by providing appropriate credit (provide article citation or content), links to the license, and indicating if there are changes.

JEBT journal and the Master Program of Energy, Universitas Diponegoro, and the Editor make every effort to ensure that there are no data, opinions, or false or misleading statements published in the JEBT journal. However, the article's content is each author's sole and exclusive responsibility.

The Copyright Transfer Form can be downloaded here: [Copyright Transfer Form]. The copyright form should be signed originally and sent to the Editor via email or fax.