DOI: https://doi.org/10.14710/potensi.2025.28800

Analisis Perencanaan Biaya Proyek Pembangunan Gedung Undiksha Berbasis Building Information Modeling (BIM)

I Kadek Rio Parsana Arta  -  Program Studi Teknik Sipil Universitas Warmadewa, Indonesia
*I Gusti Agung Gede Nodya Dharmastika  -  Program Studi Teknik Sipil Universitas Warmadewa, Indonesia
I Gusti Agung Putu Eryani  -  Program Studi Teknik Sipil Universitas Warmadewa, Indonesia

Citation Format:
Abstract
One of the innovations that has received attention is Building Information Modeling (BIM). The software that applies the BIM concept is Autodesk Revit. This study compares the Cost Budget Plan (RAB) obtained through the BIM method, and the RAB calculated by conventional methods in the Denpasar Undiksha Campus Lecture Building Construction Project, to identify a more efficient method used in project cost estimation. The method used in this study is to collect project data in the form of structural work drawings, unit price analysis, and RAB, which is used as a reference for modeling with Autodesk Revit. The RAB calculated using the BIM method modeled on Autodesk Revit was obtained lower at IDR 3,003,134,274.71. while RAB was obtained from contract documents of IDR 3,425,386,712.44. The comparison between Autodesk Revit's RAB and the contract document RAB shows a difference of IDR 422,252,437.73 with an efficiency value of 12.33%. The Cost Budget Plan (RAB) generated through modeling using Autodesk Revit shows lower and more efficient values. This shows that the application of BIM methods in project cost planning can provide more accurate and optimal results
Fulltext View|Download

Article Metrics:

Article Info
Section: Research Article
Language : ID
Recent articles
Analisis Karakteristik Campuran Aspal Beton Ac-Bc (Asphal Concrete – Binder Course) Dengan Penggunaan Abu Kulit Kopi Sebagai Filler Uji Durabilitas Beton Normal Setelah Perendaman dalam Air Laut dan Pembakaran pada Suhu Tinggi Analisis Perencanaan Biaya Proyek Pembangunan Gedung Undiksha Berbasis Building Information Modeling (BIM) More recent articles
  1. Ahmad, P. F., & Budi, W. (2022). Implementasi Revit. Implementasi Autodesk Revit Untuk Quantiiy Take Off Pada Pekerjaan Struktur Jembatan, 5, 408–416
  2. Andhini, N. F. (2017). Analisis Eksternalitas Peternakan Burung Puyuh Terhadap Kesejahteraan Masyarakat Perspektif Ekonomi Islam. Journal of Chemical Information and Modeling, 34–42
  3. Muhamad Alimin, Imron, & Muhammad Taulani. (2023). Penerapan Bulding Information Modelling (BIM) Autodesk Revit dalam Pembuatan Bar Bending Schedule (BBS) Pondasi Pile Cap Proyek Apartemen Jkt Living Star - Jakarta Timur. Jural Riset Rumpun Ilmu Teknik, 2(2), 21–32. https://doi.org/10.55606/jurritek.v2i2.1599
  4. Pamungkas, A. P. (2022). Analisis Optimalisasi Perhitungan RAB Menggunakan Revit (Studi Kasus Pembangunan Gedung Bank BRI. Analisis Optimalisasi Perhitungan Rab Menggunakan Revit (Studi Kasus Pembangunan Gedung Bank Bri Jl. Sisingamangaraja – Medan Kota), 28–29
  5. Puluhulawa, I. (2023). Quantity Take Off pada Perencanaan Gedung Apartemen Menggunakan BIM Revit. Jurnal TeKLA, 5(1), 47. https://doi.org/10.35314/tekla.v5i1.3422
  6. Rahaditya, A. V., & Bhaskara, A. B. I. (2020). Tutorial Pemodelan , Perhitungan Volume , Dan Biaya Menggunakan Revit 2018
  7. Sangadji, S., Kristiawan, S. A., & Saputra, I. K. (2019). Pengaplikasian Building Information Modeling (BIM) Dalam Desain Bangunan Gedung. Matriks Teknik Sipil, 7(4), 381–386. https://doi.org/10.20961/mateksi.v7i4.38475
  8. Suasira, I. W., Tapayasa, I. M., Santiana, I. M. A., & Wibawa, I. G. S. (2021). Analisis Komparasi Metode Building Information Modeling (Bim) Dan Metode Konvensional Pada Perhitungan Rab Struktur Proyek (Studi Kasus Pembangunan Pasar Desa Adat Pecatu). Jurnal Teknik Gradien, 13(1), 12–19. https://doi.org/10.47329/teknikgradien.v13i1.737

Last update:

No citation recorded.

Last update:

No citation recorded.