Development of Ergonomics Checklist on Stroke Therapy Aids (Wearable Elbow Exoskeleton)

Novie Susanto; Christ Novia Saraswati; Wiwik Budiawan; Rifky Ismail

doi:10.14710/jbiomes.2022.v2i1.23-29

DOI: https://doi.org/10.14710/jbiomes.2022.v2i1.23-29

Development of Ergonomics Checklist on Stroke Therapy Aids (Wearable Elbow Exoskeleton)

*Novie Susanto

- Industrial Engineering Department, Faculty of Engineering. Diponegoro University, Semarang, Indonesia, Indonesia

Christ Novia Saraswati - Industrial Engineering Department, Faculty of Engineering. Diponegoro University, Semarang, Indonesia, Indonesia

Wiwik Budiawan - Department Architecture and Civil Engineering, Toyohashi University of Technology, Japan

Rifky Ismail

- Center for Biomechanics, Biomaterial, Biomechatronics, and Biosignal Processing, Diponegoro University, Semarang, Indonesia, Indonesia

Citation Format:

Abstract

This study aims at building a checklist used for each stage of wearable Elbow Exoskeletons development. The Wearable Elbow Exoskeleton is one of the handstroke therapy aids which was developed by Diponegoro University. The product is still in the form of a prototype so some tests must be carried out before the product is tested on respondents. The test so far is still focused on functionality tests. This study provides a general checklist for ergonomics testing of stroke therapy aid products. The method of the checklist is developed based on an exploratory study and literature review for producing appropriate tests related to product characteristics. There are three iterations of product development and each version repairs the previous version. The implementation of the checklist shows that on the third iteration, the product is aligned with the objective of development and reaches the targeted level of respondents’ satisfaction.

Fulltext View|Download

Keywords: Checklist, Ergonomics, Stroke;Therapy; Wearable Elbow Skeleton

Article Metrics:

Article Info

Section: Articles

Language : EN

In Vol 2, No 1 (2022)

Recent articles

Electrochemical Detection and Spectrophotometry of Dopamine using Commercial Screen-Printed Electrodes Implementation of Brain Computer Interface (BCI) as a Smart Wheelchair Motion Commands Development of Ergonomics Checklist on Stroke Therapy Aids (Wearable Elbow Exoskeleton) More recent articles

Ministry of Health. “Riset Kesehatan Dasar.” 2013
N. Susanto, M. Mahachandra, C. N. P Saraswati. “Ergonomics Assessment for wearable Elbow Exoskeleton Prototype”. In Proceedings of the Second Asia Pacific International Conference on Industrial Engineering and Operations Management Surakarta, Indonesia, 2022, pp. 3690-3699
A. Arrigoni, M. Cumetti , A. Greco , L. Soliveri and A Vitali. “A Design Method of Tele- Rehabilitation Platforms for Post -Stroke Patients based on Consumer Technology”. Studies in Health Technology and Informatics. Volume 279: Navigating Healthcare through Challenging Times. 2021
M. H Barri, A. Ryandika, A. Cesario and A. Widyotriatmo. " Desain dan Kontrol Posisi dari Arm Manipulator Robot Sebagai Alat Rehabilitasi Pasien Pasca Stroke." Jurnal Otomasi, Kontrol dan Instrumentasi. Vol. 9, No. 2, pp. 81-95. 2017
K. D Bui and M.J Johnson. “Designing robot- assisted neurorehabilitation strategies for people with both HIV and stroke”. Journal of NeuroEngineering and Rehabilitation. Vol. 15, Art. No.75, pp. 1-15, 2018
A. Rahman and A. A Jumaily. “Design and Development of a Bilateral Therapeutic Hand Device for Stroke Rehabilitation”. Int. j. Adv. Robot. Syst, Vol. 10, Art. Nr. 405, pp. 1-12, 2013
R. H. P Sejati and R. Mardhiyyah. “Designing a Web-Based Therapy Aid Model for Non-Pharmacologists Stroke with Muscle Strength Disorder”. International Journal of Applied Business and Information Systems. Vol. 3, No. 2, September 2019, pp. 39-44, 2019
K. K Dharma. " Increase in the functional capacity and quality of life among stroke patients by family caregiver empowerment program based on adaptation model." International Journal of Nursing Sciences. Vol. 5, No.4. pp. 357-364, 2018
J. A DiCarlo, G. Gheihman and D. J. Lin. “Rehabilitation and Recovery Across the Care Continuum: Results from a Design-Thinking Workshop to Identify Challenges and Propose Solutions”. In Special Communication: Archives of Physical Medicine and Rehabilitation. Vol. 102, issue 8 , pp. 1645-1657, 2021
T. Koesdijati . " Pengembangan Alat Bantu Latihan untuk Proses Rehabilitasi Bagi Pasien Pasca Stroke" WAHANA, Vol. 69, No. 2, pp. 13-20, 2017
F. Y Wu and H. H Asada. “Implicit and Intuitive Grasp Posture Control for Wearable Robotic Fingers: A Data-Driven Method Using Partial Least Squares”. In IEEE Transactions on Robotic ,Vol. 32, No.1, pp.176–186, 2016
N. Susanto, W. Budiawan, R. Ismail, M. Ariyanto , A. Sahal. “Usability Evaluation of Anthropomorphic Prosthetic Hand Based on ISO 9241-11”. MATEC Web of Conference 159, 02069, 2017
N. Susanto, H. Prastawa, M. Mahachandra, DA Rakhmawati. “Evaluation of Usability on Bionic Anthropomorphic (BIMO) Hand for Disability Hand Patient”. Journal Industrial Engineering Science, Vol. 8, No.2, pp. 124-133, December 2019
N. Susanto, M. Mahachandra, R. Purwaningsih , W. Budiawan, A. S Afhami. “Defining Quality Function Deployment to Improve the Usability of Prosthetic Hand”. In AIP Conference Proceedings 2217, 030043. 2020
N. Susanto, H. Prastawa, A. Meilaningrum. “Designing Integrated Testing for Product Development of Prosthetic Hand”. In IOP Conference Series . Materials Science and Engineering ; Bristol Vol. 1072, 012072, Feb 2021
W. Karwowski, M. M. Soares, N. A. Stanton. “Human Factors and Ergonomics in Consumer Product Design”. CRC Press by Taylor and Francis Group. 2011

Last update:

No citation recorded.

Last update:

No citation recorded.

The Authors submitting a manuscript do so on the understanding that if accepted for publication, copyright of the article shall be assigned to Journal of Biomedical Science and Bioengineering and Diponegoro University as publisher of the journal.

Copyright encompasses exclusive rights to reproduce and deliver the article in all form and media, including reprints, photographs, microfilms and any other similar reproductions, as well as translations. The reproduction of any part of this journal, its storage in databases and its transmission by any form or media, such as electronic, electrostatic and mechanical copies, photocopies, recordings, magnetic media, etc. , will be allowed only with a written permission from Journal of Biomedical Science and Bioengineering and Diponegoro University.

Journal of Biomedical Science and Bioengineering and Center of Biomass and Diponegoro University, the Editors and the Advisory International Editorial Board make every effort to ensure that no wrong or misleading data, opinions or statements be published in the journal. In any way, the contents of the articles and advertisements published in the Journal of Biomedical Science and Bioengineering are sole and exclusive responsibility of their respective authors and advertisers.