BibTex Citation Data :
@article{JBIOMES14328, author = {Mahfud Ibadi and Yudan Whulanza and Herry Purnomo}, title = {Experimental and Numerical Evaluation of Mechanical Properties for Carbon Fiber Reinforced Epoxy LY5052 Composite for Prosthesis Structures}, journal = {Journal of Biomedical Science and Bioengineering}, volume = {2}, number = {1}, year = {2022}, keywords = {Carbon fiber; Phrostesis; maximum stress}, abstract = { Carbon Fiber Reinforced Epoxy is one of the materials that is widely used in the manufacture of phosthesis structures. In this study, the carbon fiber used carbon-kyoto type plain weave while the epoxy matrix was LY5052. The maximum stress (s) from the tensile test is 537.15 MPa. Furthermore, tensile test simulation with Finite element analysis simulation using Abaqus software, in the process the selection of mesh through input sizing control determines the accuracy of the results. The simulation results are 523.3 MPa when compared to the experiment the difference is 2.58% }, issn = {2776-4052}, pages = {18--22} doi = {10.14710/jbiomes.2022.v2i1.18-22}, url = {https://ejournal2.undip.ac.id/index.php/jbiomes/article/view/14328} }
Refworks Citation Data :
Carbon Fiber Reinforced Epoxy is one of the materials that is widely used in the manufacture of phosthesis structures. In this study, the carbon fiber used carbon-kyoto type plain weave while the epoxy matrix was LY5052. The maximum stress (s) from the tensile test is 537.15 MPa. Furthermore, tensile test simulation with Finite element analysis simulation using Abaqus software, in the process the selection of mesh through input sizing control determines the accuracy of the results. The simulation results are 523.3 MPa when compared to the experiment the difference is 2.58%
Article Metrics:
Last update:
The Authors submitting a manuscript do so on the understanding that if accepted for publication, copyright of the article shall be assigned to Journal of Biomedical Science and Bioengineering and Diponegoro University as publisher of the journal.
Copyright encompasses exclusive rights to reproduce and deliver the article in all form and media, including reprints, photographs, microfilms and any other similar reproductions, as well as translations. The reproduction of any part of this journal, its storage in databases and its transmission by any form or media, such as electronic, electrostatic and mechanical copies, photocopies, recordings, magnetic media, etc. , will be allowed only with a written permission from Journal of Biomedical Science and Bioengineering and Diponegoro University.
Journal of Biomedical Science and Bioengineering and Center of Biomass and Diponegoro University, the Editors and the Advisory International Editorial Board make every effort to ensure that no wrong or misleading data, opinions or statements be published in the journal. In any way, the contents of the articles and advertisements published in the Journal of Biomedical Science and Bioengineering are sole and exclusive responsibility of their respective authors and advertisers.
