Synthesis and Characterization of Bi13B0.48V0.49-xPxO21.45 and Efficient Catalyst for the Synthesis of 2,3-dihydroquinazolin-4(1H)-ones Derivatives Synthesis

License URL: http://creativecommons.org/licenses/by-sa/4.0

A new compound has been found in the system Bi13B0.48V0.49-x PxO21.45 (with 0≤x≤0.34), were prepared by the direct solid-state reaction of Bi2O3, (NH4)2HPO4, V2O5, and B2O3. This material melts congruently and it crystallize with the sillenite structure (space group I23) and form a solid solution with the cubic lattice parameter increasing from with a = 10.1568 Å to 10.1436 Å with increasing of P2O5 molar. Consequently, the new composites belong to g-variety of solid state. The samples have been characterized by Fourier transform infrared spectroscopy (FT-IR), diffraction XRD and scanning electron microscopy (SEM) coupled to the EDX. On the other hand, the valorization of the prepared composites was performed by using them as heterogeneous catalyst in the 2,3-dihydroquinazolin-4(1H)-ones derivatives synthesis. The catalyst is stable (as a bench top catalyst) and reusable. Copyright © 2020 BCREC Group. All rights reserved
Article Metrics:
- Gaya, U.I. (2013). Heterogeneous Photocatalysis Using Inorganic Semiconductor Solids. Springer Science & Business Media
- Pan, C., Li, X., Wang, F., Wang, L. (2008). Synthesis of bismuth oxide nanoparticles by the polyacrylamide gel route. Ceram. Int., 34, 439−441
- Xiaohong, W., Wei, Q., Weidong, H. (2007). Thin bismuth oxide films prepared through the sol–gel method as photocatalyst. J. Mol. Catal. A: Chem., 261, 167−171
- Huang, Q., Wang, Q., Tao, T., Zhao, Y., Wang, P., Ding, Z., Chen, M. (2019). Controlled Synthesis of Bi2O3/TiO2 Catalysts with Mixed Alcohols for the Photocatalytic Oxidation of HCHO. Environ. Technol., 40, 1937–1947
- Al Wazny, M.S., Salim, E.T., Bader, B.A., Fakhry, M.A. (2018). Synthesis of Bi2O3 Films, Studying Their Optical, Structural, and Surface Roughness Properties. IOP Conf. Ser. Mater. Sci. Eng., 454, 012160
- Zhu, G., Yang, W., Lv, W., He, J., Wen, K., Huo, W., Hu, J., Waqas, M., Dickerson, J.H., He, W. (2017). Facile Electrophoretic Deposition of Functionalized Bi2O3 Nanoparticles. Mater. Des., 116, 359–364
- Bandoli, G., Barreca, D., Brescacin, E., Rizzi, G.A., Tondello, E. (1996). Pure and Mixed Phase Bi2O3 Thin Films Obtained by Metal Organic Chemical Vapor Deposition. Chem. Vap. Depos., 2, 238–242
- Polat, Y., Arı, M., Dağdemir, Y. (2017). Thermal, Electrical and Structural Properties of (Bi2O3)1−x−y(Sm2O3)x(CeO2)y Electrolytes for Solid Oxide Fuel Cells. Phase Transit., 90, 387–398
- Shi, Y., Luo, L., Zhang, Y., Chen, Y., Wang, S., Li, L., Long, Y., Jiang, F. (2017). Synthesis and characterization of α/β-Bi2O3 with enhanced photocatalytic activity for 17α-ethynylestradiol. Ceram. Int., 43, 7627−7635
- Chen, R., Shen, Z.R., Wang, H., Zhou, H.J., Liu, Y.P., Ding, D.T., Chen, T.H. (2011). Fabrication of mesh-like bismuth oxide single crystalline nanoflakes and their visible light photocatalytic activity. J. Alloys Compd., 509, 2588–2596
- Wang, F., Jiang, J., Wang, B. (2019). Recent In Situ/Operando Spectroscopy Studies of Heterogeneous Catalysis with Reducible Metal Oxides as Supports. Cat., 9, 477
- Arfaoui, J., Ghorbel, A., Petitto, C., Delahay, G. (2017). Novel Vanadium Supported onto Mixed Molybdenum-Titanium Pillared Clay Catalysts for the Low Temperature SCR-NO by NH3. Chem. Eng. J., 356, 598−608
- Bokuniaeva, A.O., Vorokh, A.S. (2019). Estimation of Particle Size Using the Debye Equation and the Scherrer Formula for Polyphasic TiO2 Powder. J. Phys. Conf. Ser., 1410, 012057
- Pandya, S.G., Corbett, J.P., Jadwisienczak, W.M., Kordesch, M.E. (2016). Structural Characterization and X-Ray Analysis by Williamson–Hall Method for Erbium Doped Aluminum Nitride Nanoparticles, Synthesized Using Inert Gas Condensation Technique, Physica E Low Dimens. Syst. Nanostruct., 79, 98–102
- Bourja, L., Bakiz, B., Benlhachemi, A., Ezahri, M., Villain, S., Gavarri, J.R. (2010). Synthesis and characterization of nanosized Ce1-xbixo2-δ solid solutions for catalytic applications. Journal of Taibah University for Science, 4, 1–8
- Ai, Z., Huang, Y., Lee, S., Zhang, L. (2011). Monoclinic α-Bi2O3 Photocatalyst for Efficient Removal of Gaseous NO and HCHO under Visible Light Irradiation. J. of Alloys and Compd., 509, 2044–2049
- Rajyasree, C., Rao, D.K. (2011). Spectroscopic investigations on alkali earth bismuth borate glasses doped with CuO. J. Non-Cryst. Solids, 357, 836–841
- Hayakawa, S., Yoko, T., Sakka, S. (1995). IR and NMR structural studies on lead vanadate glasses. J. Non-Cryst. Solids, 183, 73–84
- Doweidar, H., Saddeek, Y.B. (2009). FTIR and ultrasonic investigations on modified bismuth borate glasses. J. Non-Cryst. Solid, 355, 348–354
- Jermoumi, T., Hafid, M., Toreis, N. (2002). Thermaland FTIR analysis of (50−x)BaO-x Fe2O3-50P2O5 glasses. Phys. Chem. Glasses, 43, 129−132
- Subbalakshimi, P., Sastry, P.S., Veeraiah, N. (2001). Dielectric relaxation and ac conduction phenomena in PbO-WO3-P2O5 glass system. Phys. Chem. Glasses, 42: 307-314
- Khawaja, E.E., Durrani, S.M.A., Al-Adel, F.F., Salim, M.A., Hussain, M.S. (1995). X-ray photoelectron spectroscopy and Fourier transform-infrared studies of transition metal phosphate. J. Mater. Sci., 30, 225–234
- Shih, P.Y., Chin, T.S. (1999). Effect of redox state of copper on the properties of P2O5-Na2O-CuO glasses. Mater. Chem. Phys., 60, 50–57
- Dayanand, C., Bhikshamaiah, G., Tyagaraju, V.J., Salagram, M., Krishna Murthy, A.S.R. (1996). Structural investigations of phosphate glasses: a detailed infrared study of the x(PbO)-(1−x)P2O5 vitreous system. J. Mater. Sci., 31, 1945–1967
- Sreenivasu, D., Chandramouli, V. (200). Spectroscopic and transport properties of Cu2+ ion doped in (40-x)Li2O-xLiF-60Bi2O3 glasses. Bull. Mater. Sci., 23, 509–513
- Dimitrov, V., Dimitriev, Y. (1990). Structure of glasses in PbO-V2O5 system. J. Non-Cryst. Solids, 122, 133−138
- Dachille, F., Roy, R. (1959). A New High‐pressure Form of B2O3 and Inferences on Cation Coordination from Infrared Spectroscopy. J. American Ceramic Society., 42, 78−80
- Iordanova, R., Dimitriev, Y., Dimitrov, V., Kassabov, S., Klissurski, D. (1996). Glass formation and structure in the V2O5Bi2O3Fe2O3 glasses. J. Non-Cryst. Solids, 204, 141–150
- Montagne, L., Palavit, G., Mairesse, G. (1996). 31P MAS NMR and FT IR analysis of (50-x/2) Na2O. xBi2O3.(50-x/2) P2O5 glasses. Phys. Chem. Glasses, 37, 206−211
- Moustafa, Y.M., El-Egili, K., Doweidar, H., Abbas, I. (2004). Phase equilibria in iron phosphate system. Physica B, 353, 82−91
- Baia, L., Stefan, R., Kiefer, W., Simon, S. (2005). Structural characteristics of B2O3–Bi2O3 glasses with high transition metal oxide content. J. Raman Spectrosc., 36, 262−266
- Kamitsos, E.I., Chryssikos, G.D., Karakassides, M.A. (1987). Vibrational-spectra of magnesium-sodium-borate glasses. 1. Far-infrared investigation of the cation-site interactions. J. Phys. Chem., 91, 1067−1073
- Wang, M., Zhang, T.T., Song, Z.G. (2011). Eco-friendly Synthesis of 2-substituted-2,3-dihydro-4(1H)-quinazolinones in water. Chinese Chem. Lett., 22, 427−430
- Safaei‐Ghomi, J., Teymuri, R. (2019). A Three‐component Process for the Synthesis of 2,3‐dihydroquinazolin‐4(1H)‐one Derivatives Using Nanosized Nickel Aluminate Spinel Crystals as Highly Efficient Catalysts. J. Chin. Chem. Soc., 66, 1490−1498
- Rostami, A., Tavakoli, A. (2011). Sulfamic acid as a reusable and green catalyst for efficient and simple synthesis of 2-substituted-2,3-dihydroquinazolin-4(1H)-ones in water or methanol. Chinese Chem. Lett., 22, 1317−1320
- Benzekri, Z., Serrar, H., Boukhris, S., Souizi, A. (2017). FeCl3/Egg Shell: An effective catalytic system for the synthesis of 2,3-dihydroquinazolin-4(1H)-ones at room temperature. J. Turk Chem. Soc. Sect. A: Chem., 4, 775−786
- Merroun, Y., Chehab, S., Ghailane, T., Boukhris, S., Ghailane, R., Habbadi, N., Hassikou, A., Lakhrissi, B., Souizi, A. (2018). An effective method to synthesize 2,3-dihydroquinazolin-4 (1H)-One using phosphate fertilizers (MAP, DAP and TSP) as green heterogeneous catalysts. J. Turk. Chem. Soc. Sect A: Chem., 5, 303−316
- Karhale, S., Survase, D., Bhat, R., Ubale, P., Helavi, V. (2017). A Practical and Green Protocol for the Synthesis of 2,3-Dihydroquinazolin-4(1H)-Ones Using Oxalic Acid as Organocatalyst. Res. Chem. Intermed., 43, 3915−3924
- Yassaghi, G., Davoodnia, A., Allameh, S., Zare-Bidaki, A., Tavakoli-Hoseini, N. (2012). Preparation, Characterization and First Application of Aerosil Silica Supported Acidic Ionic Liquid as a Reusable Heterogeneous Catalyst for the Synthesis of 2,3-Dihydroquinazolin-4(1H)-Ones. B. Korean Chem. Soc., 33, 2724–2730
- Yerram, P., Chowrasia, R., Seeka, S., Tangenda, S.J. (2013). Polyethylene Glycol (PEG-400) as a Medium for Novel and Efficient Synthesis of 2-Phenyl-2,3-Dihydroquinazolin-4(1H)-One Derivatives. Eur. J. Chem., 4, 462–466
- Sathe, B.P., Phatak, P.S., Kadam, A.Y., Gulmire, A.V., Narvade, P.R., Haval, K.P. (2018). An Efficient Synthesis of Substituted-2, 3-Dihydroquinazolin-4(1H)-Ones Using Fe3O4@SiO2SO3H Nano-Catalyst. Int. Res. J. Sci. Eng., A5, 99−104
- Zaghaghi, Z., Mirjalili, B.B.F., Monfared, A. (2019). Synthesis of 2,3-Dihydroquinazolin -4(1H)-Ones Promoted by Polystyrene Sulfonic Acid. Org. Chem. Res., 5, 80−86
- Katla, R., Chowrasia, R., da Silva, C., de Oliveira, A., dos Santos, B., Domingues, N. (2017). Recyclable [Ce(L-Pro)2]2 (Oxa) Used as Heterogeneous Catalyst: One-Pot Synthesis of 2,3-Dihydroquinazolin-4(1H)-Ones in Ethanol. Synthesis, 49, 5143−5148
Last update: 2021-04-17 22:58:40
Last update: 2021-04-17 22:58:40
License URL: http://creativecommons.org/licenses/by-sa/4.0
Journal Author(s) Rights
In order for BCREC Group to publish and disseminate research articles, we need publishing rights (transfered from author(s) to publisher). This is determined by a publishing agreement between the Author(s) and BCREC Group. This agreement deals with the transfer or license of the copyright of publishing to BCREC Group, while Authors still retain significant rights to use and share their own published articles. BCREC Group supports the need for authors to share, disseminate and maximize the impact of their research and these rights, in any databases.
As a journal Author, you have rights for a large range of uses of your article, including use by your employing institute or company. These Author rights can be exercised without the need to obtain specific permission. Authors publishing in BCREC journals have wide rights to use their works for teaching and scholarly purposes without needing to seek permission, including:
- use for classroom teaching by Author or Author's institution and presentation at a meeting or conference and distributing copies to attendees;
- use for internal training by author's company;
- distribution to colleagues for their reseearch use;
- use in a subsequent compilation of the author's works;
- inclusion in a thesis or dissertation;
- reuse of portions or extracts from the article in other works (with full acknowledgement of final article);
- preparation of derivative works (other than commercial purposes) (with full acknowledgement of final article);
- voluntary posting on open web sites operated by author or author’s institution for scholarly purposes,
Authors/Readers/Third Parties can copy and redistribute the material in any medium or format, as well as remix, transform, and build upon the material for any purpose, even commercially, but they must give appropriate credit (the name of the creator and attribution parties (authors detail information), a copyright notice, an open access license notice, a disclaimer notice, and a link to the material), provide a link to the license, and indicate if changes were made (Publisher indicates the modification of the material (if any) and retain an indication of previous modifications using a CrossMark Policy and information about Erratum-Corrigendum notification).
Authors/Readers/Third Parties can read, print and download, redistribute or republish the article (e.g. display in a repository), translate the article, download for text and data mining purposes, reuse portions or extracts from the article in other works, sell or re-use for commercial purposes, remix, transform, or build upon the material, they must distribute their contributions under the same license as the original Creative Commons Attribution-ShareAlike (CC BY-SA).
Copyright Transfer Agreement for Publishing (Publishing Right)
The Authors submitting a manuscript do so on the understanding that if accepted for publication, copyright for publishing (publishing right) of the article shall be assigned/transferred to Publisher of Bulletin of Chemical Reaction Engineering & Catalysis journal and Department of Chemical Engineering Diponegoro University/Masyarakat Katalis Indonesia - Indonesian Catalyst Society (MKICS) (or BCREC Group).
Upon acceptance of an article, authors will be asked to complete a 'Copyright Transfer Agreement for Publishing (CTAP)'. An e-mail will be sent to the Corresponding Author confirming receipt of the manuscript together with a 'Copyright Transfer Agreement for Publishing' form by online version of this agreement.
Bulletin of Chemical Reaction Engineering & Catalysis journal and Department of Chemical Engineering Diponegoro University/Masyarakat Katalis Indonesia-Indonesian Catalyst Society (MKICS), the Editors and the Advisory International Editorial Board make every effort to ensure that no wrong or misleading data, opinions or statements be published in the journal. In any way, the contents of the articles and advertisements published in the Bulletin of Chemical Reaction Engineering & Catalysis are sole and exclusive responsibility of their respective authors and advertisers.
Remember, even though we ask for a transfer of copyright for publishing (CTAP), our journal Author(s) retain (or are granted back) significant scholarly rights as mentioned before.
The Copyright Transfer Agreement for Publishing (CTAP) Form can be downloaded here: [Copyright Transfer Agreement for Publishing (CTAP) Form BCREC 2020]
The copyright form should be signed electronically and send to the Editorial Office in the form of original e-mail below:
Prof. Dr. I. Istadi (Editor-in-Chief)
Editorial Office of Bulletin of Chemical Reaction Engineering & Catalysis
Laboratory of Plasma-Catalysis (R3.5), UPT Laboratorium Terpadu, Universitas Diponegoro
Jl. Prof. Soedarto, Semarang, Central Java, Indonesia 50275
Telp/Whatsapp: +62-81-316426342
E-mail: bcrec[at]live.undip.ac.id
(This policy statements has been updated at 24th December 2020)