DOI: https://doi.org/10.9767/bcrec.15.3.8195.687-697

Synthesis of Ziegler-Natta Catalyst using Malaysian Ilmenite Derived TiCl4 via Recrystallization Method: A Statistical Approach

School of Materials and Mineral Resources Engineering, Universiti Sains Malaysia, 14300, Nibong Tebal, Penang, Malaysia

Received: 18 Jun 2020; Revised: 11 Aug 2020; Accepted: 13 Aug 2020; Available online: 19 Sep 2020; Published: 28 Dec 2020.
Editor(s): Istadi Istadi
Open Access Copyright (c) 2020 by Authors, Published by BCREC Group under http://creativecommons.org/licenses/by-sa/4.0.

Citation Format:
Cover Image
Abstract

In the current study, Ziegler-Natta (Z-N) catalyst was synthesized via recrystallization method using MgCl2 as a support, AlCl3 as an activator and TiCl4 as a transition metal source. The TiCl4 used in the study was derived from Malaysian ilmenite through a sequential pyrometallurgical and hydrometallurgical process of ilmenite concentrate conversion to TiCl4. The recrystallization method of synthesis of the heterogeneous Z-N catalyst was studied by varying the synthesis parameters, such as the combined amount of MgCl2 and AlCl3, temperature, and amount of TiCl4, using statistical design of experiments. The investigation aimed at determining the best conditions for synthesizing the heterogeneous Z-N catalyst. The synthesis conditions posed a significant influence on the Ti content present in the catalyst product. The morphological and elemental analysis of SEM-EDX showed good spherical nature of the prepared catalysts. The XRD phase analysis detected the peaks of MgCl2, MgCl2-Ethanol, MgCl2/TiClx, and TiO2. The IR spectra confirmed the presence of the Mg-Cl bond at 1635 cm−1 and Ti-Cl bonds at 602 cm-1 and 498 cm-1. The produced catalyst contained a small amount of TiO2, which could be due to the seepage of moisture during the analysis or storage of the sample. The most favourable combination of the studied parameters was determined based on the Ti content in the catalyst product. Therefore, the best conditions for synthesizing the heterogeneous Z-N catalyst with high Ti content (181.1 mg/L) was at a combined amount of 2 g of MgCl2 for 6 g of AlCl3, crystallization temperature of 80 °C, and 2 mL dosage of TiCl4. Copyright © 2021 by Authors, Published by BCREC Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0).

 

Fulltext View|Download
Keywords: Malaysian ilmenite; Ziegler-Natta catalyst; Recrystallization method; TiCl4; statistical design of experiments
Funding: Universiti Sains Malaysia (USM)

Article Metrics:

Article Info
Section: Original Research Articles
Language : EN
Recent articles
Acid Hydrolysis of Bis(2,2'; 6',2''–Terpyridyl) Iron(II) Complex in the Water Pools of CTAB/Hexane/Chloroform Reverse Micelles-A Kinetic Study in Confined Medium Synthesis of Ziegler-Natta Catalyst using Malaysian Ilmenite Derived TiCl4 via Recrystallization Method: A Statistical Approach Investigation on Synthesis of Trimethylolpropane (TMP) Ester from Non-edible Oil Kinetic Behaviour of Pancreatic Lipase Inhibition by Ultrasonicated A. malaccensis and A. subintegra Leaves of Different Particle Sizes Corrigendum to: Enhanced Long-term Stability and Carbon Resistance of Ni/MnxOy-Al2O3 Catalyst in Near-equilibrium CO2 Reforming of Methane for Syngas Production [15(2), 2020, 331-347] Backmatter (Publication Ethics, Copyright Transfer Agreement Form) Frontmatter (Front Cover, Editorial Team, Indexing, and Table of Contents) More recent articles
  1. Vaughan, A., Davis, D., Hagadorn, J., Salwani, M. (2017). Industrial catalysts for alkene polymerization. In Polymer Science: A Comprehensive Reference (Vol. 3, pp. 657-672): Elsevier
  2. Galli, P., Vecellio, G. (2001). Technology: driving force behind innovation and growth of polyolefins. Progress in Polymer Science, 26(8), 1287-1336
  3. Correa, A., Credendino, R., Pater, J.T., Morini, G., Cavallo, L. (2012). Theoretical Investigation of Active Sites at the Corners of MgCl2 Crystallites in Supported Ziegler–Natta Catalysts. Macromolecules, 45(9), 3695-3701
  4. Chen, Y.-P., Fan, Z.-Q. (2006). Ethylene/1-hexene copolymerization with TiCl4/MgCl2/AlCl3 catalyst in the presence of hydrogen. European Polymer Journal, 42(10), 2441-2449
  5. Parada, A., Rajmankina, T., Chirinos, J., Morillo, A. (2002). Influence of support recrystallization techniques on catalyst performance in olefin polymerization. European Polymer Journal, 38(10), 2093-2099
  6. Pokasermsong, P., Praserthdam, P. (2009). Comparison of activity of Ziegler-Natta catalysts prepared by recrystallization and chemical reaction methods towards polymerization of ethylene. Engineering Journal, 13(1), 57-64
  7. Tornqvist, E., Richardson, J., Wilchinsky, Z., Looney, R. (1967). Solid solution formation in the TiCl3-AlCl3 system. Journal of Catalysis, 8(2), 189-196
  8. Ye, Z.Y., Wang, L., Feng, L.F., Gu, X.P., Chen, H.H., Zhang, P.Y., Pan, J., Jiang, S., Feng, L.X. (2002). Novel spherical Ziegler–Natta catalyst for polymerization and copolymerization. I. Spherical MgCl2 support. Journal of Polymer Science Part A: Polymer Chemistry, 40(18), 3112-3119
  9. Sinthusai, L., Trakarnpruk, W., Strauss, R. (2017). Ziegler-Natta catalyst with high activity and good hydrogen response. Journal of Metals, Materials and Minerals, 19(2). 27-32
  10. Almeida, L.A., Marques, M.d.F.V. (2012). Synthesis of a TiCl4 Ziegler‐Natta Catalyst Supported on Spherical MgCl2·nEtOH for the Polymerization of Ethylene and Propylene. Macromolecular Reaction Engineering, 6(1), 57-64
  11. Redzic, E., Garoff, T., Mardare, C.C., List, M., Hesser, G., Mayrhofer, L., Hassel, A.W., Paulik, C. (2016). Heterogeneous Ziegler–Natta catalysts with various sizes of MgCl2 crystallites: synthesis and characterization. Iranian Polymer Journal, 25(4), 321-337
  12. Huang, R., Malizia, F., Pennini, G., Koning, C.E., Chadwick, J.C. (2008). Effects of MgCl2 crystallographic structure on active centre formation in immobilized single‐centre and Ziegler–Natta catalysts for ethylene polymerization. Macromolecular Rapid Communications, 29(21), 1732-1738
  13. Makwana, U., Naik, D.G., Singh, G., Patel, V., Patil, H.R., Gupta, V.K. (2009). Nature of phthalates as internal donors in high performance MgCl2 supported titanium catalysts. Catalysis letters, 131(3-4), 624-631
  14. Thushara, K., Ajithkumar, T., Rajamohanan, P., Gopinath, C.S. (2014). Structural investigations of porous MgCl2–2-butanol molecular adduct as support for olefin polymerization. Applied Catalysis A: General, 469, 267-274
  15. Thushara, K., Gnanakumar, E.S., Mathew, R., Jha, R.K., Ajithkumar, T., Rajamohanan, P., Sarma, K., Padmanabhan, S., Bhaduri, S., Gopinath, C.S. (2010). Toward an Understanding of the Molecular Level Properties of Ziegler−Natta Catalyst Support with and without the Internal Electron Donor. The Journal of Physical Chemistry C, 115(5), 1952-1960
  16. Czaja, K., Bialek, M. (2000). The role of magnesium chloride as support for Ziegler-Natta catalysts. Polimery, 45(9), 608-613
  17. Pirinen, S., Jayaratne, K., Denifl, P., Pakkanen, T.T. (2014). Ziegler–Natta catalysts supported on crystalline and amorphous MgCl2/THF complexes. Journal of Molecular Catalysis A: Chemical, 395, 434-439
  18. Parada, A., Rajmankina, T., Chirinos, J. (1999). Study of the MgCl2 recrystallization conditions on Ziegler-Natta catalyst properties. Polymer Bulletin, 43(2-3), 231-238
  19. Coutinho, F.M., Costa, M.A., Santos, A.L., Costa, T.H., Santa Maria, L.C.,
  20. Pereira, R.A. (1992). Characterization of Ziegler-Natta catalysts based on TiCl3 synthesized by different methods. Fresenius' Journal of Analytical Chemistry, 344(10-11), 514-516
  21. Ahmadjo, S., Jamjah, R., Zohuri, G.H., Damavandi, S., Haghighi, M.N., Javaheri, M. (2007). Preparation of highly active heterogeneous Ziegler-Natta catalyst for polymerization of ethylene. Iranian Polymer Journal, 16(1), 31
  22. Dil, E.J., Pourmahdian, S., Vatankhah, M., Taromi, F.A. (2010). Effect of dealcoholation of support in MgCl2-supported Ziegler–Natta catalysts on catalyst activity and polypropylene powder morphology. Polymer Bulletin, 64(5), 445-457
  23. Hoff, R., Mathers, R.T. (2010). Handbook of Transition Metal Polymerization Catalysts: John Wiley & Sons
  24. Kaminsky, W. (2013). Polyolefins: 50 years after Ziegler and Natta II (1 ed.): Springer-Verlag Berlin Heidelberg
  25. Böhm, L.L. (2003). The ethylene polymerization with Ziegler catalysts: fifty years after the discovery. Angewandte Chemie International Edition, 42(41), 5010-5030
  26. Klaue, A., Kruck, M., Friederichs, N., Bertola, F., Wu, H., Morbidelli, M. (2018). Insight into the synthesis process of an industrial Ziegler–Natta catalyst. Industrial & Engineering Chemistry Research, 58(2), 886-896
  27. Ahmadi, E., Fauzi, A., Hussin, H., Baharun, N., Ariffin, K.S., Rezan, S.A. (2017). Synthesis of titanium oxycarbonitride by carbothermal reduction and nitridation of ilmenite with recycling of polyethylene terephthalate (PET). International Journal of Minerals, Metallurgy, and Materials, 24(4), 444-454
  28. Ahmadi, E., Sereiratana, E., Rezan, S.A., Yeoh, F., Fauzi, A., Zhang, G. (2016). Assessment of titanium carbide chlorination by statistical design. Paper presented at the Materials Science Forum
  29. Rezan, S.A., Zhang, G., Ostrovski, O. (2007). Synthesis of titanium oxycarbonitride by carbothermal reduction of titania in nitrogen containing gas mixtures. Paper presented at the The 11th World Conference on Titanium, Kyoto, Japan
  30. Yaraghi, A., Sapri, M.H.A., Baharun, N., Rezan, S.A., Shoparwe, N.I., Ramakrishnan, S., Ariffin, K.S., Fauzi, M.A., Ismail, H., Seli, H.H. (2016). Aeration leaching of iron from nitrided Malaysian ilmenite reduced by polystyrene-coal reductant. Procedia Chemistry, 19, 715-720
  31. Ahmadi, E., Shoparwe, N.I., Ibrahim, N., Hamid, S.A.R.S.A., Baharun, N., Ariffin, K.S., Hussin, H., Fauzi, M.A. (2018). The Effects of Experimental Variables on Iron Removal from Nitrided Malaysian Ilmenite by Becher Process. In Extraction 2018 (pp. 1383-1396): Springer
  32. Ahmadi, E., Rezan, S.A., Baharun, N., Ramakrishnan, S., Fauzi, A., Zhang, G. (2017). Chlorination kinetics of titanium nitride for production of titanium tetrachloride from nitrided ilmenite. Metallurgical and Materials Transactions B, 48(5), 2354-2366
  33. Ibrahim, N., Ahmadi, E., Rahman, S.A., Fauzi, M.A., Rezan, S.A. (2017). Extraction of titanium from low-iron nitrided Malaysian ilmenite by chlorination. Paper presented at the AIP Conference Proceedings
  34. Ahmadi, E. (2018). Synthesis of titanium tetrachloride through arbothermal reduction and chlorination of ilmenite concentrate. (Doctor of Philosophy), Universiti Sains Malaysia, Malaysia. (875008031)
  35. Gnanakumar, E.S., Gowda, R.R., Kunjir, S., Ajithkumar, T., Rajamohanan, P., Chakraborty, D., Gopinath, C.S. (2013). MgCl2.6CH3OH: a simple molecular adduct and its influence as a porous support for olefin polymerization. ACS Catalysis, 3(3), 303-311
  36. Thushara, K., Gnanakumar, E.S., Mathew, R., Ajithkumar, T., Rajamohanan, P., Bhaduri, S., Gopinath, C.S. (2012). MgCl2·4((CH3)2CHCH2OH): A new molecular adduct for the preparation of TiClx/MgCl2 catalyst for olefin polymerization. Dalton Transactions, 41(37), 11311-11318
  37. Jamjah, R., Zohuri, G., Vaezi, J., Ahmadjo, S., Nekomanesh, M., Pouryari, M. (2006). Morphological study of spherical MgCl2.nEtOH supported TiCl4 Ziegler‐Natta catalyst for polymerization of ethylene. Journal of Applied Polymer Science, 101(6), 3829-3834

Last update:

No citation recorded.

Last update:

No citation recorded.