1Department of Civil Engineering, Indian Institute of Technology (BHU) Varanasi, Uttar Pradesh, India
2Department of Chemical Engineering and Technology, Indian Institute of Technology (BHU) Varanasi, Uttar Pradesh, India
BibTex Citation Data :
@article{BCREC647, author = {Ganesh Dhal and Subhashish Dey and Ram Prasad and Devendra Mohan}, title = {[RETRACTED] Simultaneous Elimination of Soot and NOX through Silver-Barium Based Catalytic Materials}, journal = {Bulletin of Chemical Reaction Engineering & Catalysis}, volume = {12}, number = {1}, year = {2017}, keywords = {Catalysts; Silver barium; Diesel soot oxidation; LNT; Simultaneous removal}, abstract = { This article was retracted due to the following reasons. Retraction note here: https://doi.org/10.9767/bcrec.12.2.1202.App.7 RETRACTION TO : Dhal, G.C., Dey, S., Prasad, R., Mohan, D. (2017). Simultaneous Elimination of Soot and NOX through Silver-Barium Based Catalytic Materials. Bulletin of Chemical Reaction Engineering & Catalysis, 12 (1): 71-80 (doi:10.9767/bcrec.12.1.647.71-80) This article has been retracted by Publisher based on the following reason : Letter to Editor from Prof. James J. Spivey (Department of Chemical Engineering, Louisiana State University) who reported that a comparison of this paper with a previously paper published in Catalysis Today (258 (2015) 405-415, doi:10.1016/j.cattod.2015.02.024) shows significant duplication according to analysis by iThenticate shows 73% similarity, which is far more than acceptable. The authors have plagiarized part of the paper that had already published in [Catalysis Today (258 (2015) 405-415, doi:10.1016/j.cattod.2015.02.024)]. Based on clarification via email, Authors of the above paper have admitted their plagiarism to the previously published paper by Catalysis Today. Editor of Bulletin of Chemical Reaction Engineering & Catalysis acknowledged Prof. James J. Spivey due to the valuable Letter to Editor. One of the conditions of submission of a paper for publication in this journal is that authors declare explicitly that their work is original and has not appeared in a publication elsewhere. Re-use of any data should be appropriately cited. As such this article represents a severe abuse of the scientific publishing system. The scientific community takes a very strong view on this matter and apologies are offered to readers of the journal that this was not detected during the submission process. }, issn = {1978-2993}, pages = {71--80} doi = {10.9767/bcrec.12.1.647.71-80}, url = {https://ejournal2.undip.ac.id/index.php/bcrec/article/view/647} }
Refworks Citation Data :
This article was retracted due to the following reasons. Retraction note here: https://doi.org/10.9767/bcrec.12.2.1202.App.7
RETRACTION TO:
Dhal, G.C., Dey, S., Prasad, R., Mohan, D. (2017). Simultaneous Elimination of Soot and NOX through Silver-Barium Based Catalytic Materials. Bulletin of Chemical Reaction Engineering & Catalysis, 12 (1): 71-80 (doi:10.9767/bcrec.12.1.647.71-80)
This article has been retracted by Publisher based on the following reason:
Letter to Editor from Prof. James J. Spivey (Department of Chemical Engineering, Louisiana State University) who reported that a comparison of this paper with a previously paper published in Catalysis Today (258 (2015) 405-415, doi:10.1016/j.cattod.2015.02.024) shows significant duplication according to analysis by iThenticate shows 73% similarity, which is far more than acceptable. The authors have plagiarized part of the paper that had already published in [Catalysis Today (258 (2015) 405-415, doi:10.1016/j.cattod.2015.02.024)]. Based on clarification via email, Authors of the above paper have admitted their plagiarism to the previously published paper by Catalysis Today.
Editor of Bulletin of Chemical Reaction Engineering & Catalysis acknowledged Prof. James J. Spivey due to the valuable Letter to Editor.
One of the conditions of submission of a paper for publication in this journal is that authors declare explicitly that their work is original and has not appeared in a publication elsewhere. Re-use of any data should be appropriately cited. As such this article represents a severe abuse of the scientific publishing system. The scientific community takes a very strong view on this matter and apologies are offered to readers of the journal that this was not detected during the submission process.
Article Metrics:
Last update:
In order for BCREC Group to publish and disseminate research articles, we need non-exclusive publishing rights (transfered from author(s) to publisher). This is determined by a publishing agreement between the Author(s) and BCREC Group. This agreement deals with the transfer or license of the copyright of publishing to BCREC Group, while Authors still retain significant rights to use and share their own published articles. BCREC Group supports the need for authors to share, disseminate and maximize the impact of their research and these rights, in any databases.
As a journal Author, you have rights for a large range of uses of your article, including use by your employing institute or company. These Author rights can be exercised without the need to obtain specific permission. Authors publishing in BCREC journals have wide rights to use their works for teaching and scholarly purposes without needing to seek permission, including:
Authors/Readers/Third Parties can copy and redistribute the material in any medium or format, as well as remix, transform, and build upon the material for any purpose, even commercially, but they must give appropriate credit (the name of the creator and attribution parties (authors detail information), a copyright notice, an open access license notice, a disclaimer notice, and a link to the material), provide a link to the license, and indicate if changes were made (Publisher indicates the modification of the material (if any) and retain an indication of previous modifications using a CrossMark Policy and information about Erratum-Corrigendum notification).
Authors/Readers/Third Parties can read, print and download, redistribute or republish the article (e.g. display in a repository), translate the article, download for text and data mining purposes, reuse portions or extracts from the article in other works, sell or re-use for commercial purposes, remix, transform, or build upon the material, they must distribute their contributions under the same license as the original Creative Commons Attribution-ShareAlike (CC BY-SA).
The Authors submitting a manuscript do so on the understanding that if accepted for publication, non-exclusive right for publishing (publishing right) of the article shall be assigned/transferred to Publisher of Bulletin of Chemical Reaction Engineering & Catalysis journal and Department of Chemical Engineering Diponegoro University/Masyarakat Katalis Indonesia - Indonesian Catalyst Society (MKICS) (or BCREC Group).
Upon acceptance of an article, authors will be asked to complete a 'Copyright Transfer Agreement for Publishing (CTAP)'. An e-mail will be sent to the Corresponding Author confirming receipt of the manuscript together with a 'Copyright Transfer Agreement for Publishing' form by online version of this agreement.
Bulletin of Chemical Reaction Engineering & Catalysis journal and Department of Chemical Engineering Diponegoro University/Masyarakat Katalis Indonesia-Indonesian Catalyst Society (MKICS), the Editors and the Advisory International Editorial Board make every effort to ensure that no wrong or misleading data, opinions or statements be published in the journal. In any way, the contents of the articles and advertisements published in the Bulletin of Chemical Reaction Engineering & Catalysis are sole and exclusive responsibility of their respective authors and advertisers.
Remember, even though we ask for a transfer of copyright for publishing (CTAP), our journal Author(s) retain (or are granted back) significant scholarly rights as mentioned before.
The Copyright Transfer Agreement for Publishing (CTAP) Form can be downloaded here: [Copyright Transfer Agreement for Publishing (CTAP) Form BCREC 2020]
The copyright form should be signed electronically and send to the Editorial Office in the form of original e-mail below: Prof. Dr. I. Istadi (Editor-in-Chief)Editorial Office of Bulletin of Chemical Reaction Engineering & CatalysisLaboratory of Plasma-Catalysis (R3.5), UPT Laboratorium Terpadu, Universitas DiponegoroJl. Prof. Soedarto, Semarang, Central Java, Indonesia 50275Telp/Whatsapp: +62-81-316426342E-mail: bcrec[at]live.undip.ac.id
(This policy statements has been updated at 24th December 2020)
