The Effect of Aluminum Source on Performance of Beta-Zeolite as a Support for Hydrocracking Catalyst
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
In this paper, three different kinds of aluminum sources (sodium aluminate, aluminum sulfate and aluminum isopropylate) were used for preparing of nano beta-zeolite. The as synthesized zeolites were mixed with the as prepared amorphous silica-alumina to produce the supports for hydrocracking catalyst. The prepared supports were used for preparation of NiMo/silica alumina-nano beta-zeolite by impregnation method. The influence of the aluminum source for preparation of beta-zeolite on the performance of the prepared catalysts has been studied. The samples were thoroughly characterized by X-Ray diffraction method (XRD), field emission-scanning electron microscopy (FE-SEM), N2 adsorption-desorption isotherms (BET), temperature programmed desorption (TPD) and temperature programmed reduction (TPR) methods. The catalysts performance was evaluated by vacuum gas oil (VGO) hydrocracking at 390 oC in a fixed bed reactor. The XRD patterns showed that the beta-zeolite samples obtained from the present methods were pure and highly crystalline and the crystal size of the prepared zeolites were in nanometer scale. Crystallite size of nano beta-zeolite synthesized by aluminum isopropylate [Al(iPrO)3] was smaller than those of prepared by the other aluminum sources. The catalyst containing this zeolite with higher surface area (231 m2/g) and more available acid sites (1.66 mmol NH3/g) possessed higher activity and selectivity to gas oil (71.9 %). Copyright © 2018 BCREC Group. All rights reserved
Received: 25th April 2018; Revised:22nd July 2018; Accepted: 29th July 2018
How to Cite: Hadi, M., Aghabozorg, H.R., Bozorgzadeh, H.R., Ghasemi, M.R. (2018). The Effect of Aluminum Source on Performance of Beta-Zeolite as a Support for Hydrocracking Catalyst. Bulletin of Chemical Reaction Engineering & Catalysis, 13 (3): 543-552 (doi:10.9767/bcrec.13.3.2570.543-552)
- Hassan, A., Ahmed, S., Ali, M.A., Hamid, H., Inui, T. (2001). A Comparison between β and USY Zeolite Based Hydrocracking Catalysts. Applied Catalysis A, 220: 59-68.
- Landau, M.V., Vradman, L., Valtchev, V., Lezervant, J., Liubich, E., Talianker, M. (2003). Hydrocracking of Heavy Vacuum Gas Oil with a Pt/H-beta−Al2O3 Catalyst: Effect of Zeolite Crystal Size in the Nanoscale Range. Industrial & Engineering Chemistry Research, 42: 2773-2782.
- Cui, Q., Zhou, Y., Wei, Q., Tao, X., Yu, G., Wang, Y., Yang, J. (2012). Role of the Zeolite Crystallite Size on Hydrocracking of Vacuum Gas Oil over NiW/Y-ASA Catalysts. Energy & Fuels, 26: 4664-4670.
- Cui, Q., Zhou, Y., Wei, Q., Yu, G., Zhu, L. (2013). Performance of Zr- and P-Modified USY-based Catalyst in Hydrocracking of Vacuum Gas Oil. Fuel Processing Technology, 106: 439-446.
- Henry, R., Tayakout-Fayolle, M., Afanasiev, P., Lorentz, C., Lapisardi, G., Pirngruber, G. (2014). Vacuum Gas Oil Hydrocracking Performance of Bifunctional Mo/Y Zeolite Catalysts in a Semi-batch Reactor. Catalysis Today, 220: 159-167.
- Kumaran, G., Garg, Muthu., Kumar, Shelu., Viswanatham, Manoj., Gupta, N., Sharma, J.K., Dhar, L.D., Murali, G. (2006). Origin of Hydrocracking Functionality in β-Zeolite-Supported Tungsten Catalysts. Energy & Fuels, 20: 2308-2313.
- Xu, B., Rodunno, F., Bordiga, S., Prins, R., Bokhoven, J.A. (2006). Reversibility of Structural Collapse in Zeolite Y: Alkane Cracking and Characterization. Journal of Catalysis, 241: 66-73.
- Soualah, A., Lemberton, J.L., Pinard, L., Chater, M., Magnoux, P., Moljord, K. (2008) Hydroisomerization of Long-chain-alkanes on Bifunctional Pt/Zeolite Catalysts: Effect of the Zeolite Structure on the Product Selectivity and on the Reaction Mechanism, Applied Catalysis A, 336: 23-28.
- Cao, F., Wu, Y., Gu, J., Wang, J. (2011). Hydrothermal Synthesis of Nanocrystalline Zeolite Beta by Acid-catalyzed Hydrolysis of Teraethylorthosilicate, Materials Chemistry and Physics, 130: 727-732.
- Chaikittisilp, W., Yokoi, T., Okubo, T. (2008). Crystallization Behavior of Zeolite Beta with Balanced Incorporation of Silicon and Aluminum Synthesized from Alkali Metal Cation-free Mixture. Microporous Mesoporous Materials, 116: 188-195.
- Sagarzazu, A., González, G. (2013). Influence of TEA2O/SiO2 Ratio on the Polymorph Formation and Crystallization of Zeolite Beta. Materials Chemistry and Physics, 138: 640-649.
- Zhang, H., Xie, B., Meng, X-J., Müller, U., Yilmaz, B., Feyen, Ms., Maurer, S., Gies, H., Tatsumi, T., Bao, X., Zhang, W., DeVos, D., Xiao, F-Sh. (2013). Rational Synthesis of Beta Zeolite with Improved Quality by Decreasing Crystallization Temperature in Organotemplate-free Route. Microporous Mesoporous Materials, 180: 123-129.
- Mintova, S., Valtchev, V., Onfroy, T., Marichal, C., Knözinger, H., Bein, T. (2006). Variation of the Si/Al Ratio in Nanosized Zeolite Beta Crystals. Microporous Mesoporous Materials, 90: 237-245.
- Chen, S., Li, T., Cao, G., Guan, M. (2002). US Patent 6 399 530.
- Camblor, M.A., Corma, A., Mifsud, A., Perez-Pariente, J., Valencia, S. (1997). Synthesis of Nanocrystalline Zeolite Beta in the Absence of Alkali Metal Cations. Studies in Surface Science and Catalysis, 105: 341-348.
- Lakshmi Kantam, Rao, M., Bhavnari, P.C., Choudary, B.M., Koteswara Rao, K., Sreedhar, B., Iwasawa, Y., Sasaki, T. (2006). Synthesis of Nanocrystalline Zeolite Beta in Supercritical Fluids, Characterization and Catalytic Activity. Journal of Molecular Catalysis A: Chemical, 252: 76-84.
- Wu, Q., Wang, X., Qi, G., Guo, Q., Pan, Sh., Meng, X., Xu, J., Deng, F., Fan, F., Feng, Zh., Li, C., Maurer, S., Muller, U., Xiao, F-Sh. (2014). Sustainable Synthesis of Zeolites without Addition of both Organotemplates and Solvents. Journal of American Chemical Society, 136: 4019-4025.
- Kore, R., Satpati, B., Srivastava, R. (2011). Synthesis of Dicationic Ionic Liquids and their Application in the Preparation of Hierarchical Zeolite Beta. Chemistry A European Journal, 17: 14360-14365.
- Kim, D.S., Chang, J-S., Hwang, J-S., Park, S-E., Kim, J.M. (2004). Synthesis of Zeolite Beta in Fluoride Media under Microwave Irradiation. Microporous Mesoporous Materials, 68: 77-82.
- Zhang, J., Cao, P., Yan, H., Wu, Zh., Dou, T. (2016). Synthesis of Hierarchical Zeolite Beta with Low Organic Template Content via the Steam-assisted Conversion Method. Chemical Engineering Journal, 291: 82-93.
- Modhera, B., Chakraborty, M., Parikh, P.A., Jasra, R.V. (2009). Synthesis of Nano‐crystalline Zeolite β: Effects of Crystallization Parameters. Crystal Research and Technology, 44: 379-385.
- Qu, L., Zhang, W., Kooyman, P.J., Prins. R. (2003). MAS NMR, TPR, and TEM Studies of the Interaction of NiMo with Alumina and Silica–Alumina Supports. Journal of Catalysis, 215: 7-13.
- Al-Dalama, Kh., Stanislaus, A. (2011). Temperature Programmed Reduction of SiO2–Al2O3 Supported Ni, Mo and NiMo Catalysts Prepared with EDTA. Thermochimia Acta, 520: 67-74.
- Jiang, J., Dong, Zh., Chen, H., Sun, J., Yang, Ch., Cao, F. (2013). The Effect of Additional Zeolites in Amorphous Silica–Alumina Supports on Hydrocracking of Semirefined Paraffinic Wax. Energy & Fuels, 27: 1035-1039.
- Ding, L. Zheng, Y., Zhang, Z., Ring, Z., Chen, J. (2006). Hydrotreating of Light Cycled Oil using WNi/Al2O3 Catalysts Containing Zeolite Beta and/or Chemically Treated Zeolite Y. Journal of Catalysis, 241: 435-445.
- Meng, Q., Liu, B., Piao, J., Liu, Q. (2012). Synthesis of the Composite Material Y/ASA and Its Catalytic Performance for the Cracking of n-Decane. Journal of Catalysis, 290: 55-64.
- Solı´s, D., Agudo, A.L., Ramı´rez, J., Klimova, T. (2006). Hydrodesulfurization of Hindered Dibenzothiophenes on Bifunctional NiMo Catalysts Supported on Zeolite–Alumina Composites. Catalysis Today, 116: 469-477.
- Manrique, C., Guzman, A., Perez- Pariente, J., Márquez-Álvarez, C., Echavarría. A. (2016). Effect of Synthesis Conditions on Zeolite Beta Properties and Its Performance in Vacuum Gas Oil Hydrocracking Activity. Microporous Mesoporous Materials, 234: 347-360.
- Zhang, X., Tang, D., Jiang, G. (2013). Synthesis of Zeolite NaA at Room Temperature: The Effect of Synthesis Parameters on Crystal Size and Its Size Distribution. Advanced Powder Technology, 24: 689-696.
- Ancheyta, J., Speight, J.G. (2007). Hydroprocessing of Heavy Oils and Residual, CRC Press, pp. 146.
- Ding, L., Zheng, Y., Yang, H., Parviz, R. (2009). LCO Hydrotreating with Mo-Ni and W-Ni Supported on Nano- and Micro-sized Zeolite Beta. Applied Catalysis A, 353: 17-23.
- Leydier, F., Chizallet, C., Chaumonnot, A., Digne, M., Soyer, E., Quoineaud, A-A., Costa, D., Raybaud, P. (2011). Brønsted Acidity of Amorphous Silica–Alumina: The Molecular Rules of Proton Transfer. Journal of Catalysis, 284: 215-229.
- Occelli, M.L., Biz, S., Auroux, A., Ray, G.J. (1998). Effects of the Nature of the Aluminum Source on the Acidic Properties of Some Mesostructured Materials. Microporous Mesoporous Materials, 26: 193-213.
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
As a journal Author, you have rights for a large range of uses of your article, including use by your employing institute or company. These Author rights can be exercised without the need to obtain specific permission.
Authors publishing in BCREC journals have wide rights to use their works for teaching and scholarly purposes without needing to seek permission, including: use for classroom teaching by Author or Author's institutionand presentation at a meeting or conference and distributing copies to attendees; use for internal training by author's company; distribution to colleagues for their reseearch use; use in a subsequent compilation of the author's works; inclusion in a thesis or dissertation; reuse of portions or extrcats from the article in other works (with full acknowledgement of final article); preparation of derivative works (other than commercial purposes) (with full acknowledgement of final article); voluntary posting on open web sites operated by author or author’s institution for scholarly purposes (follow CC by SA License).
Authors and readers can copy and redistribute the material in any medium or format, as well as remix, transform, and build upon the material for any purpose, even commercially, but they must give appropriate credit (cite to the article or content), provide a link to the license, and indicate if changes were made. If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original.
Copyright Transfer Agreement
The Authors submitting a manuscript do so on the understanding that if accepted for publication, copyright publishing of the article shall be assigned to Bulletin of Chemical Reaction Engineering & Catalysis journal and Department of Chemical Engineering Diponegoro University as publisher of the journal.
Copyright encompasses exclusive rights to reproduce and deliver the article in all form and media, including reprints, photographs, microfilms and any other similar reproductions, as well as translations. The reproduction of any part of this journal, its storage in databases and its transmission by any form or media, such as electronic, electrostatic and mechanical copies, photocopies, recordings, magnetic media, etc., will be allowed only with a written permission from Bulletin of Chemical Reaction Engineering & Catalysis journal and Department of Chemical Engineering Diponegoro University.
Bulletin of Chemical Reaction Engineering & Catalysis journal and Department of Chemical Engineering Diponegoro University, the Editors and the Advisory International Editorial Board make every effort to ensure that no wrong or misleading data, opinions or statements be published in the journal. In any way, the contents of the articles and advertisements published in the Bulletin of Chemical Reaction Engineering & Catalysis are sole and exclusive responsibility of their respective authors and advertisers.
Remember, even though we ask for a transfer of copyright, our journal authors retain (or are granted back) significant scholarly rights.
The Copyright Transfer Form can be downloaded here: [Copyright Transfer Form BCREC 2016]
The copyright form should be signed originally and send to the Editorial Office in the form of original mail, scanned document or fax :
Prof. Dr. I. Istadi (Editor-in-Chief)
Editorial Office of Bulletin of Chemical Reaction Engineering and Catalysis
Department of Chemical Engineering, Diponegoro University
Jl. Prof. Soedarto, Kampus Undip Tembalang, Semarang, Central Java, Indonesia 50275
Telp.: +62-24-7460058, Fax.: +62-24-76480675