An Efficient Synthesis of 1,8-Dioxo-Octahydroxanthenes Derivatives Using Heterogeneous Ce-ZSM-11 Zeolite Catalyst
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
The Ce-ZSM-11 zeolite has been used as an efficient catalyst for the one pot synthesis of 1,8-dioxo-octahydroxanthene derivatives from aromatic aldehyde and 5,5-dimethyl-cyclohexane-1,3-dione under reflux condition. The catalyst was characterized by Powder X-ray diffraction (XRD), Scanning Electron Microscopy (SEM), Energy Dispersive Spectroscopy (EDS), Fourier Transform Infrared Spectroscopy (FTIR), Brunauer-Emmer-Teller (BET) surface area analysis, and Temperature Programmed Desorption (TPD) techniques. This method provides several advantageous such as use of inexpensive catalyst, simple work-up procedure, high yield of desired product and reusability of catalyst. Copyright © 2018 BCREC Group. All rights reserved
Received: 5th January 2018; Revised: 25th May 2018; Accepted: 27th May 2018
How to Cite: Magar, R.R., Pawar, G.T., Gadekar, S.P., Lande, M.K. (2018). An Efficient Synthesis of 1,8-Dioxo-Octahydroxanthenes Derivatives Using Heterogeneous Ce-ZSM-11 Zeolite Catalyst. Bulletin of Chemical Reaction Engineering & Catalysis, 13 (3): 436-446 (doi:10.9767/bcrec.13.3.2062.436-446)
- Niknam, K., Borazjani, N., Rashidian, R., Jamali, A. (2013). Silica-bonded N- Propylpiperazine Sodium N-Propionate as Recyclable Catalyst for Synthesis of 4H-Pyran Derivative. Chin. J. Catal., 34: 2245-2254.
- Domling, A., Ugi, I. (2000). Multicomponent Reaction with Isocyanides. Angew. Chem. Int. Ed., 39: 3168-3210.
- Kappe, C.O. (2000). Recent Advances in the Beginelli Dihydropyrimidone Synthesis. New Tricks from an Old Dog. Acc. Chem. Res., 33: 879-888.
- Zhu, J., Bienayme, H. (2005). Multicomponant Reaction. Weinheim;Wiley-VCH.
- El-Brashy, A.M., El-Sayed Metwally, M., El-Sepai, F.A. (2004). Spectrophotometric Determination of Some Fluoroquinolone Antibacterial by Binary Complex Formation with Xanthene Dyes. Farmaco, 59: 809-817.
- Hafez, H.N., Hegab, M.I., Ahmed-Farag, I.S., El-Gazzar, A.B. (2008). A Facile Synthesis of Novel Spiro-Thioxanthene and Spiro-Xanthene-9’, 2[1,3,4] Thiadiazole Derivatives as Potential Analgesic and Anti-Inflammatory Agents. Bioorg. Med. Chem. Lett., 18: 4538-4543.
- Poupelin, J.P., Saint-Ruf, G., Foussard-Blanpin, O., Marcisse, G., Uchida-Earnauf, G., Lacroix, R. (1978). Synthesis and Anti-Inflammatory Properties of Bis(2-hydroxy-1-naphthyl) Methane Derivatives. Eur. J. Med. Chem., 13: 67-71.
- Mulakayala, N., Murthy, P.V.N.S., Rambabu, D., Aeluri, M., Adepu, R., Krishna, G.R., Reddy, C.M., Prasad, K.R.S., Chaitanya, M., Kumar, C.S., Basaveswara Rao, M.V., Pal, M. (2012). Catalsis by Molecular Iodine: A Rapid Synthesis of 1,8 Dioxo-octahydroxanthenes and their Evaluation as Potential Anticancer Agents. Bioorg. Med. Chem. Lett., 22: 2186-2191.
- Murgra, D.C., Patel, M.P., Rajani, D.P., Patel, R.G. (2011). Synthesis and Identification of β-Aryloxyquinolines and their Pyrano[3,2-C] Chromene Derivatives as a New Class of Antimicrobial and Antituberculosis Agents. Eur. J. Med. Chem., 46: 4192-4200.
- Ahmad, M., King, T.A., Ko, D.K., Cha, B.H., Lee, J. (2002). Performance and Photostability of Xanthene and Pyrromethene Laser Dyes in Sol-Gel Phases. J. Phys. D. Appl. Phys., 35: 1473-1476.
- Hilderbrand, S.A., Weissleder, R. (2007). One-pot Synthesis of New Symmetric and Asymmetric Xanthene Dyes. Tetrahedron Lett., 48: 4383- 4385.
- Karami, B., Jafar Hoseini, S., Eskandari, K., Ghasemi, A., Nasrabadi, H. (2012). Synthesis of Xanthene Derivatives by Employing Fe3O4 Nanoparticles as an Effective and Magnetically Recoverable Catalyst in Water. Catal. Sci. Technol., 2: 331-338.
- Soliman, H.A., Salama, T.A. (2013). Silicon-mediated Highly Efficient Synthesis of 1,8 Dioxo-octahydroxanthenes and their Transformation to Novel Functionalized Pyrano-tetrazolo [1,5-A] Azepine Derivatives. Chinese Chemical Lett., 24: 404-406.
- Ilangovan, A., Muralidharan, S., Sakthivel, P., Malayappasamy, S., Karuppusamy, S., Kaushik, M.P. (2013). Simple and Cost Effective Acid Catalysts for Efficient Synthesis of 9-Aryl-1,8 Dioxooctahydroxanthene. Tetrahedron Lett., 54: 491- 494.
- Nazari, S., Keshavarz, M., Karami, B., Iravani, N., Vafaee-Nezhad, M. (2014). Imidazol-1-yl-acetic Acid as a Novel Green Bifunctional Organocatalyst for the Synthesis of 1, 8-Dioxooctahydroxanthene under Solvent Free Condition. Chinese Chemical Lett., 25: 317-320.
- Sivaguru, P., Lalitha, A. (2014). Ceric Ammonium Nitrate Supported HY-Zeolite: An Efficient Catalyst for the Synthesis of 1,8-Dioxooctahydroxanthene. Chinese Chemical Lett., 25: 321-323.
- Shirini, F., Yahyazadeh, A., Mohammadi, K. (2014). One-pot Synthesis of Various Xanthene Derivatives using Ionic Liquid 1,3-Disulfonic Acid Imidazolium Hydrogen Sulfate as an Efficient and Reusable Catalysts under Solvent Free Condition. Chinese Chemical Lett., 25: 341-347.
- Lasemi, Z., Mehrasbi, E. (2015). ZnO Nanoparticles: An Efficient and Reuasable Catalyst for One-pot Synthesis of 1,8-Dioxo-octahydroxanthene. Res. Chem. Intermed., 41: 2855-2866.
- Tabatabaeian, K., Zanjanchi, M.A., Mamaghani, M., Dadashi, A. (2016). Ruthenium Anchored on Multi-walled Arbon Nanotubes: An Efficient and Reusable Catalyst for the Synthesis of Xanthene. Res. Chem. Intermed., 42: 5049-5067.
- Safa, K.D., Taheri, E., Allahvirdinesbat, M., Niaei, A. (2016). Sonochemical Synthesis of Xanthene Derivative using Zeolite Supported Transition Metal Catalyst in Aqueous Media. Res. Chem. Intermed., 42: 2989-3004.
- Rana, V., Kanagaraj, K., Pitchamani, K. (2012). A Multicomponent, Solvent Free, One-pot Synthesis of Benzoxanthenone Catalyzed by HY Zeolite: Their Anti-Microbial and Cell Imaging Studies. Tetrahedron Lett., 53: 1018-1024.
- Yu, Q., Chen, J., Zhang, Q., Li, C., Cui, Q. (2014). Micron ZSM-11 Microsperes Seed-assisted Synthesis of Hierarchiral Submicron ZSM-11 with Intergrowth Morphology. Mater. Lett., 120: 97-100.
- Yu, Q., Li, C., Tang, X., Yi, H. (2016). Effect of Seeding on the Fast Crystallization of ZSM-11 Microspheres with Intergrowth Morphology and Small Particle Size. J. Porous Mater., 23: 273-284.
- Bleken, F., Skistad, W., Barbera, K., Kustova, M., Bordiga, S., Beato, P., Lillerud, K.P., Svelle, S., Olsbye, U. (2011). Conversion of Methanol over 10-Ring Zeolites with Differing Volume at Channel Intersections: Comparison of TNU-9, IM-5, ZSM-11 and ZSM-5. Phys. Chem. Chem. Phys., 13: 2539-2549.
- Zhang, L., Liu, H.J., Li, X.J., Xie, S.J., Wang, Y.Z., Xin, W.J., Liu, S.L., Xu, L.Y. (2010). Differences between ZSM-5 and ZSM-11 Zeolite Catalyst in 1-Hexane Aromatization and Isomerization. Fuel Process. Technol., 91: 449-455.
- Bortnovsky, O., Sazama, P., Wichterlova, B. (2005). Cracking of Pentenes to C2-C4 Light Olefins over Zeolite and Zeotypes: Role of Topology and Acid Site Strength and Concentration. Appl. Catal. A, 287: 203-213.
- Meng, X., Huang, H., Zhang, Q., Zhang, M., Li, C., Cui, Q. (2016). Conversion of Methanol into Light Olefins over ZSM-11 Catalyst in a Circulating Fluidized-bed Unit. Korean J. Chem. Eng., 33: 831- 837.
- Gomez, S., Lerici, L., Saux, C., Perez, A.L., Brondino, C.D., Pierella, L., Pizzio, L. (2017). Fe/ZSM-11 as a Novel and Efficient Photo Catalyst to Degrade Dichlorvos on Water Solution. Appl. Catal. B Environ., 202: 580- 586.
- Xie, P., Ma, Z., Zhou, H., Huang, C., Yue, Y., She, W., Xu, H., Hua, W., Gao, Z., (2014). Catalytic Decomposition of N2O over Cu-ZSM-11 Catalyst. Microporous Mesoporous Mater., 191: 112-117.
- Anunziata, O.A., Mercado, G.V.G., Pierella, L.B. (2003). Catalytic Activation of Methane using N-Pentane as Co-reactant over Zn/H-ZSM-11 Zeolite. Catalysis Lett., 87: 167-171.
- Anunziata, O.A., Cussa, J., Beltramone, A.R. (2011). Simultaneous Optimization of Methane Conversion and Aromatic Yields by Catalytic Activation with Ethane over Zn-ZSM-11 Zeolite: The Influence of the Zn Loading Factor. Catal. Today., 171: 36-42.
- Lerici, L.C., Renzini, M.S., Sedran, U., Pierella, L.B. (2013). Tertiary
- Recycling of Low-density Polyethylene by Catalytic Cracking over ZSM-11 and BETA Zeolites Modified with Zn2+: Stability Study. Energy Fuels, 27: 2202-2208.
- Magar, R.R., Pawar, G.T., Arbad, B.R., Lande, M.K. (2016). Fe-MCM-22: An Efficient Heterogeneous Catalyst for One Pot Four Component Synthesis of 1H-pyrazolo [1, 2-b] phthalazine-5,10-dione Derivatives. Adv. Org. Chem. Lett., 3: 8-14
- Magar, R.R., Pawar, G.T., Gadekar, S.P., Lande, M.K. (2017). Fe-MCM-22 Catalyzed Multicomponent Synthesis of Dihydropyrano[2,3-c] pyrazole Derivatives, Iran. J. Catal., 7: 1-9.
- Treacy, M.M.J., Higgins, J.B., (2001). Collection of Simulated XRD Powder Patterns for Zeolite, New York, NY: Elsevier
- Yu, Q., Cui, C., Zhang, Q., Chen, J., Li, Y., Sun, J., Li, C., Cui, Q., Yang, C., Shan, H. (2013). Hierarchical ZSM-11 with Intergrowth Structure: Synthesis, Characterization and Catalytic Properties. Journal of Energy Chemistry, 22: 761-768.
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
As a journal Author, you have rights for a large range of uses of your article, including use by your employing institute or company. These Author rights can be exercised without the need to obtain specific permission.
Authors publishing in BCREC journals have wide rights to use their works for teaching and scholarly purposes without needing to seek permission, including: use for classroom teaching by Author or Author's institutionand presentation at a meeting or conference and distributing copies to attendees; use for internal training by author's company; distribution to colleagues for their reseearch use; use in a subsequent compilation of the author's works; inclusion in a thesis or dissertation; reuse of portions or extrcats from the article in other works (with full acknowledgement of final article); preparation of derivative works (other than commercial purposes) (with full acknowledgement of final article); voluntary posting on open web sites operated by author or author’s institution for scholarly purposes (follow CC by SA License).
Authors and readers can copy and redistribute the material in any medium or format, as well as remix, transform, and build upon the material for any purpose, even commercially, but they must give appropriate credit (cite to the article or content), provide a link to the license, and indicate if changes were made. If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original.
Copyright Transfer Agreement
The Authors submitting a manuscript do so on the understanding that if accepted for publication, copyright publishing of the article shall be assigned to Bulletin of Chemical Reaction Engineering & Catalysis journal and Department of Chemical Engineering Diponegoro University as publisher of the journal.
Copyright encompasses exclusive rights to reproduce and deliver the article in all form and media, including reprints, photographs, microfilms and any other similar reproductions, as well as translations. The reproduction of any part of this journal, its storage in databases and its transmission by any form or media, such as electronic, electrostatic and mechanical copies, photocopies, recordings, magnetic media, etc., will be allowed only with a written permission from Bulletin of Chemical Reaction Engineering & Catalysis journal and Department of Chemical Engineering Diponegoro University.
Bulletin of Chemical Reaction Engineering & Catalysis journal and Department of Chemical Engineering Diponegoro University, the Editors and the Advisory International Editorial Board make every effort to ensure that no wrong or misleading data, opinions or statements be published in the journal. In any way, the contents of the articles and advertisements published in the Bulletin of Chemical Reaction Engineering & Catalysis are sole and exclusive responsibility of their respective authors and advertisers.
Remember, even though we ask for a transfer of copyright, our journal authors retain (or are granted back) significant scholarly rights.
The Copyright Transfer Form can be downloaded here: [Copyright Transfer Form BCREC 2016]
The copyright form should be signed originally and send to the Editorial Office in the form of original mail, scanned document or fax :
Prof. Dr. I. Istadi (Editor-in-Chief)
Editorial Office of Bulletin of Chemical Reaction Engineering and Catalysis
Department of Chemical Engineering, Diponegoro University
Jl. Prof. Soedarto, Kampus Undip Tembalang, Semarang, Central Java, Indonesia 50275
Telp.: +62-24-7460058, Fax.: +62-24-76480675